Search

Pacemaker PH5215 headers suit Holden HQ, HJ, HX, HZ, and WB models running 253 & 308 V8 engines. 4-1 tuned length design
search

Holden HQ HJ HX HZ WB 253-308 V8 Pacemaker Headers PH5215

$960.00
Tax included

Holden HQ HJ HX HZ WB 253-308 V8 1971-1985 253ci and 308ci V8 Pacemaker headers (extractors). 1 5/8" [41mm] primary pipes and flanged 3.00" [76mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Holden HQ HJ HX HZ WB 253-308 V8 Pacemaker Headers PH5215

SKU: PH5215 Pacemaker Headers for Holden HQ HJ HX HZ WB 253-308 V8. These headers use 1 5/8" [41mm] primary pipes and flanged 3.00" [76mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

Make Model Years Body Series Engine Drivetrain
Holden Belmont / GTS / Kingswood / Monaro / Premier / Statesman / Sandman /  1971-1985 Sedan / Wagon / Ute / Van / One Tonner  HQ / HJ / HX / HZ / WB 253ci and 308ci V8 RWD

Fitment Notes

  • Linkages on column auto must be modified.
  • Will not Fit with Air-Conditioning [use PH5210]
  • Will not fit Turbo 350 & Turbo 400 [see ph5220]
  • Protect painted surfaces and wrap headers during trial fitting
  • Clearance may vary with engine mounts, steering, and aftermarket parts
  • Will not fit Turbo 400 trans. refer to PH5220
  • Will not fit factory air cond. refer to PH5210
  • Will fit Ford Toploader gear box with hatfield bell housing
  • Will not fit without column linkage modification
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH5215
Brand Pacemaker
Design 4-1 Tuned Length Design
Primary pipes 1 5/8" [41mm]
Outlet 3.00" [76mm] flanged outlet
Finish Pacemaker Blue heat-resistant finish
Power steering Yes
Air conditioning No
Header gasket DSF009A header gaskets, sold separately

What's Included and Recommended With

  • PH5215 Pacemaker headers.
  • DSF009A header gaskets are available separately and are recommended for a reliable seal.
  • Ceramic coating is available as an optional upgrade. See PHC30.

Why Good Headers & Exhaust Systems Matter

A 308ci V8 draws in about 8,500 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 25,500 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5215 headers suit?

PH5215 suits Holden HQ HJ HX HZ WB 253-308 V8 fitted with the 253ci and 308ci V8. Confirm your vehicle, engine, transmission and existing modifications before ordering.

Are PH5215 headers a 4-into-1 design?

Yes. PH5215 is a 4-into-1 design.

What size are the PH5215 header pipes?

Pacemaker specifies 1 5/8" [41mm] primary pipes and flanged 3.00" [76mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF009A, available separately.

Can you arrange for the PH5215 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC30 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5215


You might also like