Search

  • New
Holden Monaro CV8 2001 - 2005 LS Chev 5.7L LS1 Pacemaker PH5367 Headers and Twin 3.00" Exhaust System PP5367-57
search

Holden Monaro CV8 2001 - 2005 LS Chev 5.7L LS1 Pacemaker Headers PH5367 and Twin 3.00" Exhaust System PP5367-57

$3,795.00
Tax included

Holden Monaro CV8 2001 - 2005 LS Chev 5.7L LS1 Pacemaker PH5367 Headers and Twin 3.00" Exhaust System PP5367-57

This Australian-made Pacemaker package includes PH5367 headers (extractors), high-flow catalytic converters and a full twin 3.00" exhaust system in 409 stainless steel to suit the Holden Monaro CV8 with the 5.7L LS1 V8. Direct fit, designed to improve exhaust flow, torque, throttle response and that deep LS V8 sound.

Click the image for larger views and more photos.

Best Mufflers gives expert advice and fast shipping Australia-wide.

Quantity
Available

Holden Monaro CV8 2001 - 2005 LS Chev 5.7L LS1 Pacemaker PH5367 Headers and Twin 3.00" Exhaust System PP5367-57

SKU: PP5367-57 is a Pacemaker performance exhaust package for the Holden Monaro CV8 Coupe with LS Chev 5.7L LS1 V8 (2001 to 2005). This kit includes Pacemaker headers, high-flow catalytic converters and twin 3.00" Sports System.

Vehicle Fitment

Make Model Years Body Series Engine Drivetrain
Holden Monaro CV8 2001 - 2005 Coupe V2 / VZ CV8 LS Chev 5.7L LS1 V8 RWD

Fitment Notes

  • Twin 3.00" exhaust system with both pipes exiting on the left side. Pacemaker calls this layout "single outlet"; this describes the exit location, not a single-pipe system.
  • Direct fit for the Holden Monaro CV8 2001 - 2005. Does not fit the CV8Z 2005 - 2006 with left and right exits.

Specifications

Vehicle Application
Make / Model Holden Monaro CV8 Coupe
Years 2001 - 2005 (V2 / VZ CV8)
Engine LS Chev 5.7L LS1 V8
Exhaust exit Left side only (does not fit CV8Z 2005 - 2006)
Header Details 
PH5367 Tri-Y design headers (extractors)
Primary pipes 41mm (1 5/8")
Secondary pipes 48mm (1 7/8")
Header outlets 2.50mm (2.50") flanged outlets
Ceramic coating Available as an option
Catalytic Converters
Catalytic converters Left / right 3.00" inlet / outlet, 100cpi metallic high-flow
Cat-Back Exhaust System
Pipe size Twin 3.00" with V-Tex technology
Material Exhaust Grade 409 stainless steel
Mufflers Includes the centre and rear mufflers 
Exhaust Tips Stainless steel tips included 

What's Included and Recommended With

  • Complete Pacemaker system as supplied by Pacemaker PP5367-57
  • Includes headers and matching exhaust system components for this application
  • Ceramic Coating: Pacemaker headers can be ceramic coated. See product code PHC20

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, a 5.7L LS1 V8 draws in approximately 9,690 litres of air per minute at 85% volumetric efficiency and expels around 29,070 litres of hot exhaust gas per minute at approximately 600°C.

Warranty & Compliance

5-year Pacemaker manufacturer's warranty on the Sports exhaust system, excluding catalytic converters, against faulty material or workmanship under normal road use and subject to Pacemaker's current terms and conditions.

Pacemaker specifies separate warranty periods of 2 years for headers and 1 year for catalytic converters. Installation, removal and freight costs are not covered. Incorrect fitting, abuse, modification or damage can exclude cover. This warranty is additional to applicable consumer rights.

Vehicle modifications and exhaust requirements vary between applications and states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

Are cylinder-head-to-header gaskets included?

Yes, header gaskets are included with this complete Pacemaker exhaust system kit.

Can you arrange for the headers to be ceramic coated?

Yes. Pacemaker offers high-temperature ceramic coating for these headers. See product PHC20

What is V-Tex technology?

Pacemaker's V-Tex designs use venturi and vortex flow principles to speed up exhaust gas and improve flow. Their V-Tex merge has been independently tested to flow up to 90 CFM more than some standard X-pipe merges.

Does the existing exhaust need modifying?

This Pacemaker exhaust system is designed as direct fit for the applications listed.

Can I pick up from the store?

Yes. Store pick-up can be arranged. Contact Best Mufflers to confirm availability before travelling.

How is freight charged?

Large item: Contact Best Mufflers for freight charges before ordering. Freight depends on delivery location and stock location.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PP5367-57