Search

HSV GEN-F GEN-F2 GTS GTSR 2013-2017 6.2L Supercharged LSA Pacemaker Headers PH5385
search

HSV GEN-F GEN-F2 GTS GTSR 2013-2017 6.2L Supercharged LSA Pacemaker Competition Headers PH5385

$1,300.00
Tax included

HSV GEN-F GEN-F2 GTS GTSR 2013-2017 6.2L Supercharged LSA V8 Pacemaker competition headers (extractors). 2.00" [51mm] primary pipes and 3.50" [89mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

HSV GEN-F GEN-F2 GTS GTSR 2013-2017 6.2L Supercharged LSA Pacemaker Competition Headers PH5385

SKU: PH5385 Pacemaker Headers for HSV GEN-F GEN-F2 GTS GTSR 6.2L Supercharged LSA. These headers use 2.00" [51mm] primary pipes and 3.50" [89mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
HSVGTS2013-2017SedanGEN F6.2L Supercharged LSA V8RWD

Fitment Notes

  • These Headers require Aftermarket Cats to be fitted.
  • Requires Oxygen Sensor Wiring Loom Extension PEX5385 x 2
  • Pacemaker Hi Flow Cats: Part No. CAT5385-100 L/R
  • Full Performance Exhaust Systems are available to suit these Headers
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH5385
Brand Pacemaker
Design 4-1 Tuned Length Design
Primary pipes 2.00" [51mm]
Outlet 3.50" [89mm]
Finish Pacemaker Blue heat-resistant coating
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers
Header gasket DSF138 header gaskets, sold separately

What's Included and Recommended With

  • PH5385 Pacemaker headers.
  • Oxygen sensor fittings incorporated into the headers.
  • DSF138 header gaskets are available separately and are recommended for a reliable seal.
  • Pacemaker high-flow catalytic converters are available separately.
  • Ceramic coating is available as an optional upgrade. See PHC40.
  • PEX5385 may be required and is available separately unless listed as included.

Why Good Headers & Exhaust Systems Matter

A 6.2L Supercharged LSA V8 draws in about 10,540 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 31,620 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5385 headers suit?

PH5385 suits HSV GEN-F GEN-F2 GTS GTSR 2013-2017 6.2L Supercharged LSA fitted with the 6.2L Supercharged LSA V8. Confirm your vehicle, engine, transmission and existing modifications before ordering.

Are PH5385 headers a 4-into-1 design?

Yes. PH5385 is a 4-into-1 competition design.

What size are the PH5385 header pipes?

Pacemaker specifies 2.00" [51mm] primary pipes and 3.50" [89mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF138, available separately.

Can you arrange for the PH5385 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC40 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5385


You might also like