Search

Holden Commodore VE VF 2006-2017 6.0L 6.2L V8 Pacemaker Competition Headers PH5381
search

Holden Commodore VE VF 2006-2017 LS Chev 6.0L / 6.2L Pacemaker Competition Headers PH5381

$1,220.00
Tax included

Holden Commodore VE and VF 2006-2017 LS Chev 6.0L / 6.2L Pacemaker competition headers (extractors). 1.75" [44mm] primary pipes and 3.00" [76mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Holden Commodore VE VF 2006-2017 LS Chev 6.0L / 6.2L Pacemaker Competition Headers PH5381

SKU: PH5381 Pacemaker Headers for Holden Commodore VE VF LS Chev 6.0L / 6.2L. These headers use 1.75" [44mm] primary pipes and 3.00" [76mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
HoldenCommodore2006 - 2017Sedan / Wagon / UteVE / VF6.0L / 6.2L V8 (L98, L76, L77, LS2, LS3)RWD
HoldenStatesman / Caprice2006 - 2017SedanWM / WN6.0L / 6.2L V8RWD
HSVApplicable naturally aspirated models2006 - 2017Sedan / Wagon / UteVE / VF6.0L LS2 / 6.2L LS3RWD

Fitment Notes

  • Designed for Holden Commodore VE and VF, and applicable WM and WN Statesman/Caprice, 6.0L and 6.2L V8 models from 2006 to 2017. VE-VF Commodore: July 2006 to October 2017. WM-WN Statesman/Caprice: August 2006 to October 2017.
  • Suits 6.0L Gen IV engines (including L98, L76 and L77), 6.0L LS2 and 6.2L LS3. Does not fit the earlier 5.7L LS1, and does not fit HSV models with the supercharged 6.2L LSA engine. Use Pacemaker PH5385 for the LSA application.
  • PH5381 requires aftermarket catalytic converters. It does not connect directly to the original factory catalytic converters. Pacemaker lists CAT5380-100L/R for a 2.50" [63mm] exhaust connection and CAT5387-100L/R for a 3.00" [76mm] exhaust connection.
  • One PEX5367Z oxygen sensor wiring loom extension is required and is available as an option.
  • Will fit left-hand-drive vehicles? Confirm clearance. Will fit vehicles with factory power steering and air conditioning. Suits manual and automatic transmissions.
  • Because many VE and VF V8 vehicles have already been modified, check existing headers, catalytic converters, exhaust diameter, engine mounts and other aftermarket components before installation.
  • Professional installation is recommended. Protect painted surfaces during trial fitting. Route oxygen-sensor wiring away from the headers and other high-temperature components.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.

Specifications

Header Details
Part number SKU: PH5381
Brand Pacemaker
Design 4-1 Tuned Length Design
Primary pipes 1.75" [44mm]
Secondary pipes N/A
Outlet 3.00" [76mm]
Finish Pacemaker Blue heat-resistant coating
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers
Header gasket DSF138 cylinder head exhaust gaskets, sold separately

What's Included and Recommended With

  • PH5381 left-right Pacemaker competition headers.
  • O2 sensor extensions available as an option.
  • DSF138 cylinder head exhaust gaskets are available separately and are recommended for a reliable seal.
  • Aftermarket catalytic converters are required. Pacemaker lists CAT5380-100L/R for a 2.50" [63mm] connection and CAT5387-100L/R for a 3.00" [76mm] connection.
  • Ceramic coating is available as an optional upgrade. See PHC40.
  • BOL02-10 replacement header bolts are available separately where required.

Why Good Headers & Exhaust Systems Matter

A 6.2L LS V8 draws in about 10,540 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 31,620 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5381 headers fit?

Pacemaker lists PH5381 for VE-VF Commodore and WM-WN Statesman/Caprice models from 2006 to 2017 fitted with applicable 6.0L and 6.2L V8 engines. Confirm your vehicle, engine, transmission and existing modifications before ordering.

What engines suit PH5381?

The application covers 6.0L Gen IV V8 engines, 6.0L LS2 and 6.2L LS3. Holden VE/VF applications also include engines such as the L98, L76 and L77 within Pacemaker's broader 6.0L Gen IV listing.

Does PH5381 fit an LS1?

No. The VE/VF PH5381 application does not include the earlier 5.7L LS1 engine.

Does PH5381 fit the supercharged HSV LSA?

No. PH5381 specifically excludes the 6.2L supercharged LSA. See Pacemaker PH5385 for the LSA application.

Are PH5381 headers Tri-Y?

No. PH5381 is a 4-into-1 competition header.

What size are PH5381 headers?

Pacemaker specifies 1.75" [44mm] primary pipes with 3.00" [76mm] outlets.

Do PH5381 headers fit manual and automatic vehicles?

Yes. Pacemaker lists PH5381 for both manual and automatic transmissions.

Can I use the original catalytic converters?

No. Pacemaker specifies that aftermarket catalytic converters are required with PH5381. Pacemaker lists CAT5380-100L/R for a 2.50" [63mm] exhaust connection and CAT5387-100L/R for a 3.00" [76mm] exhaust connection.

Do I need an oxygen sensor wiring extension?

Yes. One PEX5367Z oxygen sensor wiring loom extension is required and is available as an option.

What gasket suits PH5381?

Pacemaker specifies DSF138. Cylinder head exhaust gaskets are available separately and are recommended to help achieve a reliable seal.

Can these headers be ceramic coated?

Yes. If you require ceramic coating for these headers, see PHC40.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Can I pick up from the store?

Yes. Store pick-up can be arranged. Contact Best Mufflers to confirm availability before travelling.

How is freight charged?

Large item: Contact Best Mufflers for freight charges before ordering. Freight depends on delivery location and stock location.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5381


You might also like