Search

Performance Headers for Holden Torana LC & LJ models fitted with a 5.0L Holden V8 using EFI cylinder heads.
search

Holden Torana LC & LJ 5.0 V8 With EFI Heads Custom Exhaust Headers EXT503

$2,513.00
Tax included

EXT503 performance headers (extractors) for Holden Torana LC & LJ models fitted with a 5.0L Holden V8 using EFI cylinder heads. Australian made tuned-length design with 44mm (1¾") mandrel-bent primary pipes and 76mm (3") outlets. Made to order, approximately 6-8 weeks.

Please check lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Holden Torana LC LJ 5.0L V8 EFI Heads Headers Extractors - EXT503

EXT503 high-performance headers (extractors) are designed for Holden Torana LC & LJ models fitted with a 5.0L Holden V8 using EFI cylinder heads.

Featuring a tuned-length design with large 44mm (1¾") mandrel-bent primary pipes and 76mm (3") outlets, the EXT503 is designed to provide the exhaust flow capacity required for performance Holden V8 applications. The tuned header design improves exhaust scavenging, reduces restriction and supports stronger engine performance across the usable rev range.

These headers are designed to fit with a front-mounted sway bar. Due to the limited space available in the LC/LJ Torana engine bay, correct engine positioning is essential for proper header clearance and fitment.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeHolden
ModelTorana
SeriesLC & LJ
EngineHolden 5.0L V8
Cylinder headsEFI heads

Fitment Notes

  • Designed for Holden Torana LC & LJ fitted with a Holden 5.0L V8 using EFI cylinder heads.
  • Engine must be positioned correctly for these headers to fit.
  • Designed to fit with a front-mounted sway bar.
  • Engine conversions can vary considerably. Engine mount position, transmission, steering components and other modifications can affect header clearance.
  • Check engine position and surrounding clearances before ordering.
  • Suitable header gaskets are available separately - see DSF063.
  • For a scratch-free installation, protect the header surfaces during trial fitting.
  • Professional installation is strongly recommended for converted LC/LJ Torana applications.
  • Please check current lead time before ordering.

Specifications

Part numberSKU: EXT503
DesignTuned length
Primary pipe44mm (1¾")
Outlet76mm (3")
ConstructionMandrel-bent steel
OriginAustralian made
Header gasketDSF063, sold separately

Key Features

  • Australian Made
  • Designed for Holden Torana LC & LJ
  • Suitable for 5.0L Holden V8 with EFI cylinder heads
  • Tuned-length design for street and high-performance applications
  • Mandrel-bent 44mm (1¾") primary pipes
  • Large 76mm (3") outlets
  • Designed to improve exhaust flow and scavenging
  • Heavy-duty header flanges
  • Quality welded construction
  • Fits vehicles using a front-mounted sway bar
  • Made to order

Made to Order

EXT503 headers are made to order. Please allow approximately 6-8 weeks for manufacturing before dispatch.

Manufacturing lead times are approximate and may vary depending on current production workload. Please contact us before ordering if you require the headers by a particular date.

What's Included and Recommended With

Included

  • EXT503 Left & Right Header Assemblies

Recommended with

  • DSF063 exhaust header gaskets
  • 76mm (3") performance exhaust system
  • Suitable high-flow mufflers
  • New exhaust mounting hardware where required

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, a naturally aspirated 5.0L four-stroke V8 theoretically draws approximately 10,000 litres of intake air per minute at 100% volumetric efficiency. Hot exhaust gas at approximately 600°C takes up around three times that volume, roughly 30,000 litres per minute, which places significant flow demands on the headers and exhaust system. These figures are theoretical, worked out from engine size, not measured results.

The EXT503's large 44mm primary pipes and 76mm outlets are intended for performance applications where reducing exhaust restriction and maintaining effective gas flow become increasingly important as engine speed and power output increase.

Warranty and Compliance

  • Correct engine positioning and installation are essential for proper fitment.
  • Modified engine mounts, steering, transmission or chassis components may alter available clearance.
  • Warranty applies to manufacturing defects and does not cover incorrect fitment, vehicle modifications, labour or consequential costs.
  • Verify emissions, noise and registration compliance applicable in your state or territory.

Frequently Asked Questions

What vehicles do EXT503 headers suit?

EXT503 headers are designed for Holden Torana LC & LJ models fitted with a 5.0L Holden V8 using EFI cylinder heads.

Do these headers suit original early Holden V8 cylinder heads?

These headers are specifically listed for EFI cylinder heads. If your engine uses earlier-style Holden V8 cylinder heads, contact us before ordering so the cylinder head and exhaust port configuration can be confirmed.

What size are the primary pipes?

EXT503 uses 44mm (1¾") primary pipes with large 76mm (3") outlets.

Will they fit with a front-mounted sway bar?

Yes. EXT503 is designed for applications using a front-mounted sway bar.

Why is engine position important?

The LC/LJ Torana engine bay has limited clearance around a V8 conversion. Even relatively small differences in engine height or fore-and-aft position can affect header clearance. The engine must be correctly positioned for proper fitment.

Are the headers made to order?

Yes. EXT503 headers are made to order. Please allow approximately 6-8 weeks for manufacturing before dispatch.

Which gaskets are required?

We recommend DSF063 exhaust header gaskets, available separately.

Are these headers Australian made?

Yes. EXT503 headers are Australian made.

Do you ship Australia wide?

Yes. Best Mufflers ships headers and exhaust components throughout Australia.

Is EXT503 in stock, and what is the lead time?

Please check current lead time before ordering. Availability and lead time can change, so contact us on +61 2 9547 3511 or by email and we will confirm before you order.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

EXT503


You might also like