Search

Pacemaker Headers PH4097 (extractors) | Ford Falcon XR-XE 351 Cleveland V8 3V CHI raised port heads. Competition-tuned design.
search

Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V Pacemaker Competition Headers PH4097

$1,395.00
Tax included

Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V 1966-1988 Pacemaker competition headers (extractors). 2.00" [51mm] primary pipes and flanged 3.50" [89mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V Pacemaker Competition Headers PH4097

SKU: PH4097 Pacemaker Headers for Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V. These headers use 2.00" [51mm] primary pipes and flanged 3.50" [89mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
FordFalcon1966-1988Sedan / Wagon / UteXA / XB / XC / XD / XE / XF / XR / XT / XW / XYV8 351 Cleveland 3V CHI 3VRWD

Fitment Notes

  • Will not fit F.M.X, C6, or column shift automatic transmissions
  • Will not fit C4 automatic unless dipstick tube is modified
  • For a scratch-free install, protect painted surfaces and wrap headers during trial fitting
  • Clearance may vary depending on engine mounts, steering, and aftermarket components; minor adjustment may be required
  • Right-hand side clearance near gearbox crossmember may be tight depending on mounts and setup
  • Suits 351 Cleveland 3V CHI raised port heads ; not designed for standard 2V or 4V Cleveland heads
  • Not all aftermarket 3V cylinder heads have raised ports; these headers will only fit raised-ported cylinder heads. Pacemaker suggests looking at any of our 4V headers for all standard deck height.
  • Suggested Part numbers are PH4055, PH4075, PH4085, PH4095, and PH4095-2
  • Will not fit C6 automatic. Will fit F.M.X. automatic
  • Will not fit column change automatic & manual
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH4097
Brand Pacemaker
Design 4-1 Tuned Length Design
Primary pipes 2.00" [51mm]
Outlet 3.50" [89mm] flanged outlet
Finish Pacemaker Blue heat-resistant coating
Power steering Yes
Air conditioning Yes
Header gasket DSF018 header gaskets, sold separately

What's Included and Recommended With

  • PH4097 Pacemaker headers.
  • DSF018 header gaskets are available separately and are recommended for a reliable seal.
  • Ceramic coating is available as an optional upgrade. See PHC40.

Why Good Headers & Exhaust Systems Matter

A 351ci Cleveland V8 draws in about 9,860 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 29,580 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH4097 headers suit?

PH4097 suits Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V fitted with the Ford Falcon XR-XE V8 351 Cleveland 3V CHI 3V. Confirm your vehicle, engine, transmission and existing modifications before ordering.

What size are the PH4097 header pipes?

Pacemaker specifies 2.00" [51mm] primary pipes and flanged 3.50" [89mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF018, available separately.

Can you arrange for the PH4097 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC40 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH4097


You might also like