Search

Ford Falcon EB ED EF EL XH 5.0L EFI Windsor V8 Pacemaker Headers PH4000
search

Ford Falcon EB ED EF EL XH 1991-1998 5.0L EFI Windsor V8 Pacemaker Headers PH4000

$1,040.00
Tax included

Ford Falcon EB ED EF EL and XH 1991-1998 5.0L EFI Windsor V8 Pacemaker headers (extractors). 1 5/8" [41mm] primary pipes, 1 7/8" [48mm] secondary pipes and flanged 2.25" [57mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Ford Falcon EB ED EF EL XH 1991-1998 5.0L EFI Windsor V8 Pacemaker Headers PH4000

SKU: PH4000 Pacemaker Headers for Ford Falcon EB ED EF EL XH 5.0L EFI Windsor V8. These headers use 1 5/8" [41mm] primary pipes, 1 7/8" [48mm] secondary pipes and flanged 2.25" [57mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

Make Model Years Body Series Engine Drivetrain
Ford Falcon 1991 - 1998 Sedan / Wagon / Ute EB / ED / EF / EL 5.0L EFI Windsor V8 RWD
Ford Falcon Ute 1996 - 1999 Sedan / Wagon / Ute XH 5.0L EFI Windsor V8 RWD
Ford Fairlane 1991 - 1999 Sedan NC / NF / NL 5.0L EFI Windsor V8 RWD

Fitment Notes

  • Designed for Ford Falcon EB, ED, EF, EL and XH models fitted with the 5.0L EFI 302 Windsor V8. Also suits Ford Fairlane NC, NF and NL 5.0L EFI V8 applications.
  • Will not fit GT40 cylinder heads as fitted to the 302 Windsor AU II, due to the different spark-plug angle. Pacemaker lists PH4001 for the AU 5.0L EFI Windsor. Confirm the vehicle and cylinder-head type before ordering where the engine or heads have been changed.
  • Will fit vehicles with factory power steering and air conditioning. Suits manual and automatic transmissions. Oxygen sensor provision is incorporated into the headers.
  • Confirm steering, starter motor, engine-mount, wiring and chassis clearance before final installation. Clearance may vary where non-standard engine mounts, steering components or other aftermarket parts have been fitted.
  • Professional installation is recommended. Protect painted surfaces during trial fitting. Outlets are flanged 2.25" [57mm].
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Direct Fit high flow catalytic converters,. See product code "CAT4000"

Specifications

Header Details
Part number SKU: PH4000
Brand Pacemaker
Design Tri-Y Design
Primary pipes 1 5/8" [41mm]
Secondary pipes 1 7/8" [48mm]
Outlet 2.25" [57mm] flanged outlet
Finish Pacemaker Blue heat-resistant coating
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers
Header gasket DSF3A header gaskets, sold separately

What's Included and Recommended With

  • PH4000 left-right Pacemaker headers.
  • Oxygen sensor fittings incorporated into the headers.
  • DSF3A header gaskets are available separately and are recommended for a reliable seal.
  • Pacemaker high-flow catalytic converters are available separately. See product code "CAT4000"
  • Ceramic coating is available as an optional upgrade. See PHC10.

Why Good Headers & Exhaust Systems Matter

A 5.0L Windsor V8 draws in about 8,500 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 25,500 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH4000 headers suit?

PH4000 suits Ford Falcon EB, ED, EF, EL and XH models fitted with the 5.0L EFI Windsor V8. The application also covers NC, NF and NL Fairlane 5.0L EFI V8 models. Confirm your vehicle, cylinder-head type, transmission and existing modifications before ordering.

Are PH4000 headers Tri-Y?

Yes. Pacemaker specifies PH4000 as a Tri-Y design.

What size are the PH4000 header pipes?

Pacemaker specifies 1 5/8" [41mm] primary pipes, 1 7/8" [48mm] secondary pipes and 2.25" [57mm] flanged outlets.

Will PH4000 fit GT40 cylinder heads?

No. Pacemaker states that PH4000 will not fit GT40 heads as fitted to the 302 Windsor AU II because of the different spark-plug angle.

Will PH4000 fit an AU Falcon?

PH4000 is not the normal AU Falcon application. Pacemaker lists PH4001 for the AU 5.0L EFI Windsor. Confirm the vehicle and cylinder-head configuration before ordering.

Do PH4000 headers suit manual and automatic transmissions?

Yes. Pacemaker specifies PH4000 for both manual and automatic applications.

Are header gaskets available?

Yes. Pacemaker specifies DSF3A for PH4000. Header gaskets are available separately and are recommended to help achieve a reliable seal.

Can these headers be ceramic coated?

Yes. If you require ceramic coating for these headers, see PHC10.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Can I pick up from the store?

Yes. Store pick-up can be arranged. Contact Best Mufflers to confirm availability before travelling.

How is freight charged?

Large item: Contact Best Mufflers for freight charges before ordering. Freight depends on delivery location and stock location.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH4000


You might also like