Wildcat WILD032MG headers (extractors) are designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Getrag manual transmission with hydraulic-operated clutch.
WILD032MG is a direct-fit application and will fit vehicles equipped with variable power steering. It is also listed for applicable Calais and Statesman models using the same 3.8L V6 and Getrag manual transmission configuration.
Important: Suits Getrag manual transmission with hydraulic-operated clutch only.
Please check availability before ordering.
Please check lead time before ordering.
Click the image for larger views and more photos.
Best Mufflers provides expert advice and fast shipping Australia-wide.
Wildcat WILD032MG exhaust headers (extractors) are designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Getrag manual transmission with hydraulic-operated clutch.
Featuring a Tri-Y design, WILD032MG replaces the restrictive factory exhaust manifolds with larger performance pipework designed to improve exhaust gas flow and scavenging. Reduced exhaust restriction can improve torque, throttle response and overall engine performance.
WILD032MG is a direct-fit application and is designed to suit vehicles equipped with variable power steering. It is also listed for applicable Calais and Statesman models using the same 3.8L V6 and compatible Getrag manual transmission configuration.
Important: WILD032MG suits Getrag manual transmission applications with a hydraulic-operated clutch.
Please check availability before ordering.
Please check current lead time before ordering.
Jump to: Fitment | Specifications | Installation | Warranty | FAQ
| Make | Holden |
|---|---|
| Models | Commodore / Calais / Statesman / VG Utility where applicable |
| Series | VN / VP / VR / VG |
| Engine | 3.8L V6 petrol |
| Transmission | Getrag manual |
| Clutch | Hydraulic-operated |
| Part number | SKU: WILD032MG |
|---|---|
| Brand | Wildcat, Australian made |
| Design | Tri-Y design for street performance applications |
| Primary pipe | 1.58" (approximately 40mm) |
| Secondary pipe | 2.00" (approximately 51mm) |
| Outlet | 2.50" (approximately 63mm) |
Included
Recommended with
Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal. Trial-fit both headers and check engine, transmission, hydraulic clutch components, steering and body clearance before final tightening. Inspect the existing exhaust connections and mounting hardware and replace damaged or corroded components where required.
At 4,000 rpm, the Holden 3.8L V6 draws in approximately 7,600 litres of intake air per minute and expels around 22,800 litres of hot exhaust gas per minute at approximately 600°C. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.
Wildcat headers are covered by the manufacturer's warranty subject to standard warranty terms and conditions.
Installation must retain the catalytic converters, oxygen sensors and any other emissions-control equipment required for the vehicle. Exhaust and emissions requirements vary between Australian states and territories, and the completed installation must comply with the regulations applicable in your state or territory.
WILD032MG is designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Getrag manual transmission with hydraulic-operated clutch. They are also listed for applicable Calais and Statesman models using the same engine and compatible transmission configuration.
WILD032MG is designed for the Getrag manual transmission with hydraulic-operated clutch. Please confirm the transmission and clutch configuration before ordering.
No. WILD032MG is specifically designed for the Getrag manual transmission with hydraulic-operated clutch. Borg Warner manual applications require the appropriate cable-clutch header version.
No. WILD032MG is specifically listed for the Getrag manual transmission application.
Yes. WILD032MG is listed as a direct-fit application for the applicable standard vehicle configuration.
Yes. WILD032MG is listed as suitable for vehicles equipped with variable power steering.
Yes, WILD032MG is listed for applicable Calais and Statesman models fitted with the same 3.8L V6 engine and compatible Getrag manual transmission configuration.
WILD032MG uses 1.58" primary pipes, 2.00" secondary pipes and 2.50" outlets.
The recommended replacement exhaust manifold/header gasket is DSF060, available separately.
Yes. Pick up is available but must be pre-arranged before collection.
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.
Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.
For phone orders, advice, or part enquiries - contact us:
📞 Call Now: +61 2 9547 3511 ✉️ Email Us
🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours
You might also like