Search

Wildcat WILD032 headers (extractors) are designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6
search

Holden Commodore VN VP VR 3.8 V6 Borg Warner Manual Wildcat Headers WILD032M

$744.59
Tax included

Wildcat WILD032M headers (extractors) are designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Borg Warner manual transmission with cable-operated clutch.

WILD032M is a direct-fit application and will fit vehicles equipped with variable power steering. It is also listed for applicable Calais and Statesman models using the same 3.8L V6 and Borg Warner manual transmission configuration.

Important: Suits Borg Warner manual transmission with cable-operated clutch only.

Please check availability before ordering.

Please check lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Holden Commodore VN VP VR VG 3.8L V6 Borg Warner Manual Headers Extractors - Wildcat WILD032M

Wildcat WILD032M exhaust headers (extractors) are designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Borg Warner manual transmission with cable-operated clutch.

Featuring a Tri-Y design, WILD032M replaces the restrictive factory exhaust manifolds with larger performance pipework designed to improve exhaust gas flow and scavenging. Reduced exhaust restriction can improve torque, throttle response and overall engine performance.

WILD032M is a direct-fit application and is designed to suit vehicles equipped with variable power steering. It is also listed for applicable Calais and Statesman models using the same 3.8L V6 and compatible Borg Warner manual transmission configuration.

Important: WILD032M suits Borg Warner manual transmission applications with a cable-operated clutch.

Please check availability before ordering.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Installation | Warranty | FAQ

Vehicle Fitment

MakeHolden
ModelsCommodore / Calais / Statesman / VG Utility where applicable
SeriesVN / VP / VR / VG
Year RangeApproximately 1988-1995 depending on model
Engine3.8L V6 petrol
TransmissionBorg Warner manual
ClutchCable-operated

Fitment Notes

  • Designed for selected VN, VP, VR and VG 3.8L V6 applications
  • Suits Borg Warner manual transmissions with cable-operated clutch
  • Direct-fit application
  • Will fit vehicles equipped with variable power steering
  • Will fit applicable Calais and Statesman models using the same 3.8L V6 and compatible transmission configuration
  • Replacement exhaust manifold/header gaskets - see DSF060
  • Vehicle modifications, engine conversions, transmission conversions, aftermarket steering components or non-standard engine mounts may affect clearance and fitment
  • Please check availability before ordering.
  • Please check current lead time before ordering.

Specifications

Part numberSKU: WILD032M
BrandWildcat, Australian made
DesignTri-Y design for street performance applications
Primary pipe1.58" (approximately 40mm)
Secondary pipe2.00" (approximately 51mm)
Outlet2.50" (approximately 63mm)

Key Features

  • Designed for selected Holden Commodore VN, VP, VR and VG models
  • Suits the 3.8L V6 petrol engine
  • Suits Borg Warner manual transmission with cable-operated clutch
  • Tri-Y design for street performance applications
  • 1.58" (approximately 40mm) primary pipes
  • 2.00" (approximately 51mm) secondary pipes
  • 2.50" (approximately 63mm) outlets
  • Direct-fit application
  • Will fit vehicles equipped with variable power steering
  • Also listed for applicable Calais and Statesman models
  • Designed to improve exhaust flow, torque, throttle response and engine performance

Construction

  • Australian-made Wildcat performance headers
  • Quality mild steel construction
  • Strong welded construction for durability
  • Heat-resistant painted finish rated to approximately 600°C
  • Heavy-duty cylinder-head mounting flanges

What's Included and Recommended With

Included

  • 1 x Pair Wildcat WILD032M headers / extractors

Recommended with

  • DSF060 exhaust manifold/header gaskets
  • Replacement manifold studs and nuts where existing hardware is worn or corroded
  • New exhaust flange hardware where required
  • Quality performance exhaust system where further exhaust flow improvement is required

Installation Tips

Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal. Trial-fit both headers and check engine, transmission, clutch cable, steering and body clearance before final tightening. Inspect the existing exhaust connections and mounting hardware and replace damaged or corroded components where required.

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, the Holden 3.8L V6 draws in approximately 7,600 litres of intake air per minute and expels around 22,800 litres of hot exhaust gas per minute at approximately 600°C. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Warranty and Compliance

Wildcat headers are covered by the manufacturer's warranty subject to standard warranty terms and conditions.

Installation must retain the catalytic converters, oxygen sensors and any other emissions-control equipment required for the vehicle. Exhaust and emissions requirements vary between Australian states and territories, and the completed installation must comply with the regulations applicable in your state or territory.

Frequently Asked Questions

What vehicles do WILD032M headers suit?

WILD032M is designed for selected Holden Commodore VN, VP, VR and VG models fitted with the 3.8L V6 petrol engine and Borg Warner manual transmission with cable-operated clutch. They are also listed for applicable Calais and Statesman models using the same engine and compatible transmission configuration.

What manual transmission does WILD032M suit?

WILD032M is designed for the Borg Warner manual transmission with cable-operated clutch. Please confirm the transmission and clutch configuration before ordering.

Will WILD032M fit an automatic transmission?

No. WILD032M is specifically listed for the Borg Warner manual transmission application.

Are WILD032M headers direct fit?

Yes. WILD032M is listed as a direct-fit application for the applicable standard vehicle configuration.

Will WILD032M fit variable power steering?

Yes. WILD032M is listed as suitable for vehicles equipped with variable power steering.

Will WILD032M fit a Holden Calais or Statesman?

Yes, WILD032M is listed for applicable Calais and Statesman models fitted with the same 3.8L V6 engine and compatible Borg Warner manual transmission configuration.

What size are the WILD032M header pipes?

WILD032M uses 1.58" primary pipes, 2.00" secondary pipes and 2.50" outlets.

What exhaust gaskets are required?

The recommended replacement exhaust manifold/header gasket is DSF060, available separately.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

WILD032M


You might also like