Search

Wildcat WILD088E hotbox exhaust headers (extractors) for Holden Torana LH and LX 1974 to 1978 173ci or 202ci Holden Red Motor.
search

Holden Torana LH-LX 173-202 Red Motor Hotbox Wildcat Headers WILD088E

$414.56
Tax included

Wildcat WILD088E exhaust headers (extractors) are designed for selected Holden Torana LH and LX models from 1974 to 1978 fitted with the 173ci or 202ci Holden Red Motor six-cylinder engine.

WILD088E is the hotbox version. It suits Torana LH and LX models fitted with a hotbox (inlet manifold heat riser).

Featuring a Tri-Y design with 1.50" primary pipes, 1.75" secondary pipes and a 2.00" outlet, WILD088E is designed to improve exhaust scavenging and exhaust gas flow to improve torque, throttle response and engine performance.

Important: WILD088E will not suit vehicles fitted with Powerglide or Hydramatic automatic transmissions.

Please check availability before ordering.

Please check lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Holden Torana LH LX 173 202 Red Motor Hotbox Headers Extractors - Wildcat WILD088E

Wildcat WILD088E exhaust headers (extractors) are designed for selected Holden Torana LH and LX models from 1974 to 1978 fitted with the 173ci or 202ci Holden Red Motor six-cylinder engine.

WILD088E is the hotbox version. It suits Torana LH and LX models fitted with a hotbox (inlet manifold heat riser).

Manufactured in Australia, WILD088E features a Tri-Y header design for street performance applications. The combination of 1.50" primary pipes, 1.75" secondary pipes and a 2.00" outlet is designed to improve exhaust scavenging and exhaust gas flow to improve torque, throttle response and usable engine performance.

Important: WILD088E will not suit vehicles fitted with Powerglide or Hydramatic automatic transmissions.

Please check availability before ordering.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Installation | Warranty | FAQ

Vehicle Fitment

MakeHolden
ModelTorana
SeriesLH / LX
Year Range1974-1978
EngineHolden Red Motor
Engine Capacity173ci / 202ci
ConfigurationInline 6-cylinder
TransmissionManual / selected automatic applications
ExclusionPowerglide and Hydramatic automatic transmissions

Fitment Notes

  • Hotbox version: suits vehicles fitted with a hotbox
  • Designed for selected Holden Torana LH and LX models from 1974-1978
  • Suits 173ci and 202ci Holden Red Motor six-cylinder engines
  • Suitable for manual and selected automatic transmission applications
  • Will not suit Powerglide or Hydramatic automatic transmissions
  • Older Toranas may have had engine, transmission, steering or exhaust modifications that can affect header clearance and fitment
  • Confirm the engine and transmission combination before ordering
  • Please check availability before ordering.
  • Please check current lead time before ordering.

Specifications

Part numberSKU: WILD088E
BrandWildcat, Australian made
DesignTri-Y design for street performance applications
Primary pipe1.50" (approximately 38mm)
Secondary pipe1.75" (approximately 45mm)
Outlet2.00" (approximately 51mm)

Key Features

  • Designed for selected Holden Torana LH and LX models
  • Suits 173ci and 202ci Holden Red Motor six-cylinder engines
  • Tri-Y design for street performance applications
  • 1.50" (approximately 38mm) primary pipes
  • 1.75" (approximately 45mm) secondary pipes
  • 2.00" (approximately 51mm) outlet
  • Suitable for manual and selected automatic transmission applications
  • Will not suit Powerglide or Hydramatic automatic transmissions
  • Designed to improve exhaust flow, torque, throttle response and engine performance

Construction

  • Australian-made Wildcat performance headers
  • Quality mild steel construction
  • Strong welded construction for durability
  • Heat-resistant painted finish rated to approximately 600°C
  • Heavy-duty cylinder-head mounting flange

What's Included and Recommended With

Included

  • 1 x Wildcat WILD088E header / extractor assembly
  • Outlet connection components as supplied

Recommended with

  • DSF002 exhaust manifold/header gasket
  • High-temperature exhaust gasket sealant
  • Replacement manifold studs and nuts where required
  • Quality performance exhaust system where further exhaust flow improvement is required

Installation Tips

  • Lubricate manifold studs, nuts and exhaust fasteners with WD-40 or a similar penetrating lubricant before removal
  • Remove all traces of the old manifold gasket before installing the headers
  • Inspect the cylinder-head sealing surface, manifold studs and threads before installation
  • Fit a new DSF002 gasket and use high-temperature exhaust sealant where recommended
  • Trial-fit the headers before fully tightening the fasteners
  • Check clearance around the steering, transmission, starter motor and bodywork
  • Protect the painted header surfaces during installation
  • Re-tighten the header/manifold bolts after approximately 500km to help maintain a reliable gasket seal

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, the 3.3L / 202ci Holden Red Motor draws in approximately 6,620 litres of intake air per minute and expels around 19,860 litres of hot exhaust gas per minute at approximately 600°C. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Warranty and Compliance

Wildcat headers are covered by the applicable 2-year manufacturer's warranty subject to standard warranty terms and conditions.

Correct installation and adequate clearance around the engine, transmission, steering and surrounding components are essential. Vehicle, engine, transmission or exhaust modifications may affect fitment.

Frequently Asked Questions

Which Holden Torana models does WILD088E suit?

WILD088E is designed for selected Holden Torana LH and LX models from 1974-1978 fitted with 173ci or 202ci Holden Red Motor six-cylinder engines.

Does WILD088E suit both the 173 and 202 Red Motor?

Yes. WILD088E is listed for both the 173ci and 202ci Holden Red Motor applications.

Will WILD088E fit an automatic Torana?

WILD088E suits selected automatic transmission applications, but will not suit Powerglide or Hydramatic automatic transmissions. Confirm your transmission before ordering.

What size are the WILD088E headers?

WILD088E uses 1.50" primary pipes, 1.75" secondary pipes and a 2.00" outlet.

Which gasket does WILD088E use?

The recommended exhaust manifold/header gasket is DSF002, available separately.

What finish is used on WILD088E?

The headers have a heat-resistant painted finish rated to approximately 600°C.

Are WILD088E headers Australian made?

Yes. Wildcat WILD088E headers are manufactured in Australia.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

WILD088E


You might also like