Search

Pacemaker Headers PH5004 - Holden EH HD HR HK HT HG HQ HJ HX Red Motor Pre-EGR
search

Holden EH HD HR HK HT HG HQ HJ HX HZ WB Red Motor Pacemaker Headers PH5004

$695.01
Tax included

Holden EH HD HR HK HT HG HQ HJ HX HZ WB Red Motor 1963-1984 Holden six cylinder Red Motor (pre-EGR) Pacemaker headers (extractors). 1.50" [38mm] primary pipes, 2.00" [51mm] secondary pipes and 2.25" [57mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Holden EH HD HR HK HT HG HQ HJ HX HZ WB Red Motor Pacemaker Headers PH5004

SKU: PH5004 Pacemaker Headers for Holden EH HD HR HK HT HG HQ HJ HX HZ WB Red Motor. These headers use 1.50" [38mm] primary pipes, 2.00" [51mm] secondary pipes and 2.25" [57mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
HoldenTorana1974-1978SedanEH / HD / HR / HK / HT / HG / HQ / HJ / HX / HZ / WB202ci 3.3L Red Motor (pre-EGR)RWD

Fitment Notes

  • Pacemaker currently lists PH5004 for 1974-1978. This listing has previously been shown for 1963-1984. Confirm the year and application against Pacemaker's current listing before ordering.
  • HJ, HX, HZ and WB models fit with pre-EGR engines. For EGR engines see Holden HJ HX HZ WB 173 202 Red Motor Pacemaker Headers PH5005
  • Also listed by Pacemaker for Holden FX, FJ, FE, FC, FB, EK and EJ models (1948-1963) converted to a pre-EGR Red Motor
  • FX to EJ conversions: will not fit with bellhousing sidemounts on the grey motor gearbox
  • Will fit with Delco, Frigidaire and Sankyo air conditioner units
  • Will not fit Hydromatic or Powerglide automatics
  • Suits column change manual and automatic transmissions
  • Will fit multi-carburettor setups
  • Not suitable for left-hand drive vehicles
  • Engine mounts, steering and aftermarket components can affect clearance
  • Will fit with Delco, Fridgidaire and Sankyo Air Conditioner units
  • Will not fit Hydromatic and Powerglide autos
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH5004
Brand Pacemaker
Design Tri-Y Design
Primary pipes 1.50" [38mm]
Secondary pipes 2.00" [51mm]
Outlet 2.25" [57mm]
Finish Pacemaker Blue heat-resistant finish
Power steering Yes
Air conditioning Yes
Header gasket DSF002 header gaskets, sold separately

What's Included and Recommended With

  • PH5004 Pacemaker headers.
  • DSF002 header gaskets are available separately and are recommended for a reliable seal.
  • Ceramic coating is available as an optional upgrade. See PHC70.

Why Good Headers & Exhaust Systems Matter

A 202ci 3.3L six draws in about 5,610 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 16,830 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5004 headers suit?

PH5004 suits Holden EH HD HR HK HT HG HQ HJ HX HZ WB Red Motor fitted with the Holden six cylinder Red Motor (pre-EGR). Confirm your vehicle, engine, transmission and existing modifications before ordering. Pacemaker currently lists this part for 1974-1978.

Are PH5004 headers Tri-Y?

Yes. Pacemaker specifies PH5004 as a Tri-Y design.

What size are the PH5004 header pipes?

Pacemaker specifies 1.50" [38mm] primary pipes, 2.00" [51mm] secondary pipes and 2.25" [57mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF002, available separately.

Can you arrange for the PH5004 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC70 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5004


You might also like