Search

Pacemaker Headers PH5080 Holden Commodore VE to 2012 3.6 V6 Alloytec 180kw & 210kw
search

Holden Commodore VE WM 3.6 V6 Alloytec Pacemaker Headers PH5080

$623.53
Tax included

Holden Commodore VE WM 3.6 V6 Alloytec 2006-2012 3.6L Alloytec V6, 180kW SOHC or 210kW DOHC (including 3.6L SIDI 2009-2012) Pacemaker headers (extractors). 1 5/8" [41mm] primary pipes and 2.25" [57mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Holden Commodore VE WM 3.6 V6 Alloytec Pacemaker Headers PH5080

SKU: PH5080 Pacemaker Headers for Holden Commodore VE WM 3.6 V6 Alloytec. These headers use 1 5/8" [41mm] primary pipes and 2.25" [57mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
HoldenCommodore / Statesman / Caprice2006-2012Sedan / Wagon / UteVE / WM3.6L Alloytec V6, 180kW SOHC or 210kW DOHC (including 3.6L SIDI 2009-2012)RWD

Fitment Notes

  • Fabrication is required. The original engine pipe is cut in front of the catalytic converter. An extra flange is supplied to weld to the original exhaust, creating a flange point for the headers
  • Will not fit 3.0L SIDI (one piece head and manifold)
  • Will not fit 3.0L or 3.6L after 2012
  • 3.6L SIDI 2009-2012 needs 2 x PEX5080 oxygen sensor wiring extensions, available as an option.
  • Engine mounts, steering and aftermarket components can affect clearance
  • Will not fit 3.0L S.I.D.I. (due to 1 piece head manifold combination)
  • *Note - Fabrication is required* These Headers do not bolt to a factory flange position. The original engine pipe needs to be cut in front of the cat. A extra flange is supplied to be welded to the original exhaust after the cut is made. This creates a flange point for the headers to bolt to.
  • Not suitable for 3.0 Litre or 3.6 Litre after 2012
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH5080
Brand Pacemaker
Design Tuned Design
Primary pipes 1 5/8" [41mm]
Outlet 2.25" [57mm]
Finish Pacemaker Blue heat-resistant finish
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers

What's Included and Recommended With

  • PH5080 Pacemaker headers.
  • Oxygen sensor fittings incorporated into the headers.
  • Ceramic coating is available as an optional upgrade. See PHC50.
  • O2 sensor extensions available as an option.

Why Good Headers & Exhaust Systems Matter

A 3.6L Alloytec V6 draws in about 6,120 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 18,360 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5080 headers suit?

PH5080 suits Holden Commodore VE WM 3.6 V6 Alloytec fitted with the 3.6L Alloytec V6, 180kW SOHC or 210kW DOHC (including 3.6L SIDI 2009-2012). Confirm your vehicle, engine, transmission and existing modifications before ordering.

What size are the PH5080 header pipes?

Pacemaker specifies 1 5/8" [41mm] primary pipes and 2.25" [57mm] outlets.

Can you arrange for the PH5080 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC50 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5080


You might also like