Search

Holden Commodore VN VP VR VS 5.0 EFI V8 Pacemaker Headers / Extractors PN# PH5002
search

Holden Commodore VN VP VR VS SS 5.0L V8 Pacemaker Competition Headers PH5002

$1,221.88
Tax included

Holden Commodore VN VP VR VS SS 5.0L V8 1988-1997 5.0L EFI V8 Pacemaker competition headers (extractors). 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and 3.00" [76mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Holden Commodore VN VP VR VS SS 5.0L V8 Pacemaker Competition Headers PH5002

SKU: PH5002 Pacemaker Headers for Holden Commodore VN VP VR VS SS 5.0L V8. These headers use 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and 3.00" [76mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
HoldenCommodore, including SS1988-1997Sedan / Wagon / UteVN / VP / VR / VS5.0L EFI V8RWD

Fitment Notes

  • Will fit six speed manual
  • Will fit with both Bosch starter motors
  • Will fit VS Series 3 ute with Getrag 5 speed
  • Will fit VS Series 3 ute auto (not with full circle bellhousing)
  • Confirm your vehicle, engine and transmission configuration before ordering
  • Will NOT fit with Variable Ratio Power Steering
  • Will fit with six speed manual
  • Suitable for 5.7 litre stroked or super charged motor
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.

Specifications

Header Details
Part number SKU: PH5002
Brand Pacemaker
Design Tri-Y Design
Primary pipes 1.75" [44mm]
Secondary pipes 2.00" [51mm]
Outlet 3.00" [76mm]
Finish Pacemaker Blue heat-resistant coating
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers
Header gasket DSF063 header gaskets, sold separately

What's Included and Recommended With

  • PH5002 Pacemaker headers.
  • Oxygen sensor fittings incorporated into the headers.
  • DSF063 header gaskets are available separately and are recommended for a reliable seal.
  • Ceramic coating is available as an optional upgrade. See PHC10.

Why Good Headers & Exhaust Systems Matter

A 5.0L EFI V8 draws in about 8,500 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 25,500 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH5002 headers suit?

PH5002 suits Holden Commodore VN VP VR VS SS 5.0L V8 fitted with the 5.0L EFI V8. Confirm your vehicle, engine, transmission and existing modifications before ordering.

Are PH5002 headers Tri-Y?

Yes. Pacemaker specifies PH5002 as a Tri-Y design.

What size are the PH5002 header pipes?

Pacemaker specifies 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and 3.00" [76mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF063, available separately.

Can you arrange for the PH5002 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC10 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH5002


You might also like