Search

Pacemaker Headers PH2555 - Chrysler VC Valiant 340 / 360 V8 Conversion to help maximise engine performance.
search

Chrysler Valiant AP5 AP6 VC 318 360 V8 Pacemaker Headers PH2555

$1,343.09
Tax included

Chrysler Valiant AP5 AP6 VC 318 360 V8 1966-1967 340-360 (J Heads) V8 Pacemaker headers (extractors). 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and flanged 3.00" [76mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Chrysler Valiant AP5 AP6 VC 318 360 V8 Pacemaker Headers PH2555

SKU: PH2555 Pacemaker Headers for Chrysler Valiant AP5 AP6 VC 318 360 V8. These headers use 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and flanged 3.00" [76mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
ChryslerValiant1966-1967Sedan / WagonVC340-360 (J Heads) V8RWD

Fitment Notes

  • Designed for Chrysler VC Valiant V8 conversion applications
  • J Heads are identified by a "J" stamped on pads above the spark plugs
  • Automatic column-shift linkages may require modification
  • Designed for automatic transmission vehicles only
  • Requires engine mount conversion using Tuff Mounts TM304
  • Gearbox mount required: Tuff Mount TMG028
  • Protect painted surfaces and wrap headers during trial fitting
  • Clearance may vary depending on engine mounts, steering or aftermarket components
  • These headers are not pipe-over-cone design
  • Important - This kit is designed to use all TUFF MOUNTS conversion compantants. Pacemaker cannot guarantee the fitment of the headers with any other third party conversion kit as it hasn't been tried and tested. This product must use Tuff Mounts Engine Mounts , Trans Mount and Gearbox Crossmember. Click Here for Tuff Mount Conversion Kit
  • Will fit Column Shift Automatic with a Column Linkage Modification
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH2555
Brand Pacemaker
Design 4-1 Tuned Length Design
Primary pipes 1.75" [44mm]
Secondary pipes 2.00" [51mm]
Outlet 3.00" [76mm] flanged outlet
Finish Pacemaker Blue heat-resistant coating
Power steering Yes

What's Included and Recommended With

  • PH2555 Pacemaker headers.
  • Ceramic coating is available as an optional upgrade. See PHC40.

Why Good Headers & Exhaust Systems Matter

A 360ci V8 draws in about 10,030 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 30,090 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH2555 headers suit?

PH2555 suits Chrysler Valiant AP5 AP6 VC 318 360 V8 fitted with the 340-360 (J Heads) V8. Confirm your vehicle, engine, transmission and existing modifications before ordering.

Are PH2555 headers a 4-into-1 design?

Yes. PH2555 is a 4-into-1 design.

What size are the PH2555 header pipes?

Pacemaker specifies 1.75" [44mm] primary pipes, 2.00" [51mm] secondary pipes and flanged 3.00" [76mm] outlets.

Can you arrange for the PH2555 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC40 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH2555


You might also like