Search

Toyota LandCruiser HJ45 HJ47 1972-1984 3.6L H Diesel Wildcat Exhaust Headers WILD211
search

Toyota LandCruiser HJ45 HJ47 3.6 H Diesel Wildcat Exhaust Headers/Extractors WILD211

$537.04
Tax included

Wildcat WILD211 Tri-Y headers (extractors) for selected Toyota LandCruiser HJ45 and HJ47 models from 1972 to 1984 with the 3.6L H inline 6-cylinder diesel engine. Australian made by Genie Headers from mild steel, with 1 1/2 inch (38mm) primary pipes, 1 3/4 inch (44mm) secondary pipes and a 2 inch (51mm) slip outlet. Inside-chassis.

Please check current lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Toyota LandCruiser HJ45 and HJ47, 3.6L H Diesel (1972-1984) Headers Extractors - Wildcat WILD211

WILD211 Wildcat headers (extractors) are Australian made by Genie Headers from mild steel, for selected Toyota LandCruiser HJ45 and HJ47 models from 1972 to 1984 fitted with the 3.6L H inline 6-cylinder diesel engine. This Tri-Y, inside-chassis design is designed to improve exhaust gas flow and low-speed torque for street, touring and 4WD use.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Installation | Warranty | FAQ

Vehicle Fitment

MakeToyota
ModelLandCruiser
ChassisHJ45 and HJ47
Year range1972-1984
EngineToyota H, 3.6L (3576cc) inline 6-cylinder diesel
Header configurationInside chassis
Manual and automaticBoth

Fitment Notes

  • Designed for selected Toyota LandCruiser HJ45 and HJ47 models fitted with the 3.6L H diesel engine. Please confirm the vehicle has the H engine before ordering
  • Inside-chassis header configuration
  • Older LandCruisers may have engine, transmission, steering or exhaust modifications that can affect header clearance and fitment
  • Check clearance around the chassis, engine mounts, steering, transmission and surrounding components
  • Please check current lead time before ordering.

Specifications

Part numberSKU: WILD211
BrandWildcat, Australian made by Genie Headers
DesignTri-Y, inside-chassis
MaterialMild steel
Primary pipe1 1/2 inch (38mm)
Secondary pipe1 3/4 inch (44mm)
Outlet2 inch (51mm) slip
FinishHeat-resistant paint rated to approximately 600°C
Header gasketDSF071 (also listed as RBG211S), sold separately
Exhaust mount rubbersTYB202 (sold separately)
Fitting timeAbout 2 hours (listed by the manufacturer)

What's Included and Sold Separately

  • Included: 1 x set Wildcat WILD211 headers (extractors)
  • Sold separately: header gasket DSF071 (also listed as RBG211S), exhaust mount rubbers TYB202, replacement manifold studs and nuts where existing hardware is worn or corroded, and exhaust system pipes

Installation Tips

  • Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal
  • Remove all traces of the old manifold gasket and inspect the cylinder-head sealing surface, studs and threads
  • Fit a new DSF071 exhaust manifold/header gasket
  • Trial-fit the headers before fully tightening the mounting hardware, and check clearance around the chassis, engine mounts, steering, transmission and surrounding components
  • Protect the painted header surfaces during trial fitting and installation
  • Check all exhaust connections for leaks after installation, and inspect and re-tighten the header mounting hardware after the first heat cycles

Why Good Headers & Exhaust Systems Matter

At ~85% volumetric efficiency, a 3.6L Toyota H diesel at 4000rpm draws in approximately 6,100L/min and expels around 18,300L/min exhaust gas due to heat expansion. A well-designed header and exhaust system helps move this gas efficiently, reducing restriction and improving scavenging.

Warranty and Compliance

Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

Correct fitment depends on the vehicle remaining compatible with the original application. Exhaust, noise and emissions requirements vary by state, territory and vehicle, so check the rules that apply to your vehicle before fitting.

Frequently Asked Questions

Which Toyota LandCruiser models does WILD211 suit?

WILD211 is designed for selected Toyota LandCruiser HJ45 and HJ47 models from 1972 to 1984 fitted with the 3.6L H diesel engine. Contact us with your model and engine if you are unsure.

Does WILD211 run inside the chassis?

Yes. WILD211 uses an inside-chassis header configuration.

What size are the WILD211 header pipes?

WILD211 uses 1 1/2 inch (38mm) primary pipes, 1 3/4 inch (44mm) secondary pipes and a 2 inch (51mm) slip outlet.

Who makes Wildcat headers, and are they Australian made?

Wildcat headers are Australian made by Genie Headers. WILD211 is made from mild steel with a heat-resistant paint finish rated to approximately 600°C.

Is there a warranty?

Yes. Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

Is WILD211 in stock, and what is the lead time?

Please check current lead time before ordering. Availability and lead time can change, so contact us on +61 2 9547 3511 or by email and we will confirm before you order.

Are header gaskets included?

The header gasket is not included unless specifically selected or stated otherwise. The recommended gasket for this application is DSF071 (also listed as RBG211S).

Can these headers be ceramic coated?

Ceramic coating is not offered for Wildcat headers.

Will I need to modify my existing exhaust system?

Depending on the exhaust system currently fitted, connection or fabrication work may be required between the WILD211 outlets and the existing exhaust system. Contact us if you need advice on suitable exhaust components.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Are they road legal?

Exhaust, noise and emissions requirements vary by state, territory and vehicle. Check the rules that apply to your vehicle before fitting, and make sure the finished installation complies.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

WILD211