Genie GEN811E headers (extractors) are designed for the Toyota Prado 120 Series and Hilux 4.0L V6 1GR-FE from 2005 to 2015.
Featuring a tuned-length design with mandrel-bent 1 3/4" (44mm) primary pipes and a 2 1/4" (57mm) outlet, GEN811E is designed to improve exhaust scavenging, torque, throttle response and engine performance for street and everyday driving applications.
Since 1966, Genie has been designing and developing performance headers in Australia, giving over 50 years of experience backed by an experienced development team focused on quality and customer satisfaction.
Please check current lead time before ordering.
Click the image for larger views and more photos.
Best Mufflers provides expert advice and fast shipping Australia-wide.
Genie GEN811E exhaust headers (extractors) are designed for the Toyota Prado 120 Series and Hilux 4.0L V6 1GR-FE from 2005 to 2015.
Featuring a tuned-length design, GEN811E replaces the restrictive factory exhaust manifold and is designed to improve exhaust gas flow and scavenging. Mandrel-bent pipework provides smooth exhaust flow to help improve mid-range torque, throttle response and overall engine performance.
Since 1966, Genie has been designing and developing performance headers in Australia, giving over 50 years of experience backed by an experienced development team focused on quality and customer satisfaction.
Please check current lead time before ordering.
Jump to: Fitment | Specifications | Installation | Warranty | FAQ
| Make | Toyota |
|---|---|
| Model | Prado, Hilux |
| Series | Prado 120 Series, Hilux GGN15R / GGN25R |
| Engine | 1GR-FE V6 petrol |
| Capacity | 4.0L / 3956cc |
| Year | 2005-2015 |
| Part number | SKU: GEN811E |
|---|---|
| Brand | Genie, Australian made |
| Design | Tuned-length design for improved exhaust scavenging, torque and throttle response |
| Primary pipe | 1 3/4" (44mm) |
| Outlet | 2 1/4" (57mm), double flange |
| Header gasket | RBG277 (Genie/Wildcat catalogue gasket part number) |
| Supplier gasket reference | RBG277 |
| Header plate reference | RHF277 |
| Typical fitting time | 4 hours |
Included
Recommended with
Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal. Trial-fit the header and exhaust connection before fully tightening all fasteners. Typical fitting time is around 4 hours. Re-check bolt torque after the first few heat cycles. Protect the painted surfaces during installation to minimise scratching or damage.
At 4,000 rpm, the 4.0L 1GR-FE V6 draws in approximately 7,910 litres of intake air per minute and expels around 23,700 litres of hot exhaust gas per minute at approximately 600°C. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.
Genie headers are covered by a 2-year manufacturer's warranty subject to standard warranty terms and conditions.
Exhaust and emissions requirements vary between Australian states and territories. Installation must retain the catalytic converter, oxygen sensors and any other emissions-control equipment required for the vehicle and comply with the regulations applicable in your state or territory.
GEN811E is designed for the Toyota Prado 120 Series and Hilux 4.0L V6 1GR-FE from 2005 to 2015.
GEN811E uses 1 3/4" (44mm) primary pipes and a 2 1/4" (57mm) outlet.
Yes. We recommend new header gaskets. The Genie/Wildcat catalogue gasket part number for GEN811E is RBG277.
Genie headers are covered by a 2-year manufacturer's warranty subject to standard warranty terms and conditions.
Typical fitting time is around 4 hours for an experienced installer. Older vehicles with seized fasteners may take longer.
Yes. Pick up is available but must be pre-arranged before collection.
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.
For phone orders, advice, or part enquiries - contact us:
📞 Call Now: +61 2 9547 3511 ✉️ Email Us
🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours