Search

Pacemaker PH4496 headers are engineered for Ford Falcon BA, BF, and FG 4.0L DOHC engines.
search

Ford Falcon BA BF FG inc XR6 4.0L DOHC Pacemaker Competition Headers PH4496

$772.94
Tax included

Ford Falcon BA BF FG inc XR6 4.0L DOHC 2002-2016 Pacemaker competition headers (extractors). 1 5/8" [41mm] primary pipes, 1.75" [44mm] secondary pipes and 3.00" [76mm] outlets.
Click Image for larger view and more images
Best Mufflers provides expert advice and ships Australia-wide and internationally.

Quantity
In Stock

Ford Falcon BA BF FG inc XR6 4.0L DOHC Pacemaker Competition Headers PH4496

SKU: PH4496 Pacemaker Headers for Ford Falcon BA BF FG inc XR6 4.0L DOHC. These headers use 1 5/8" [41mm] primary pipes, 1.75" [44mm] secondary pipes and 3.00" [76mm] outlets to improve exhaust flow, torque and throttle response.

Jump to: Fitment | Specifications | Warranty | FAQ

Vehicle Fitment

MakeModelYearsBodySeriesEngineDrivetrain
FordFalcon2002-2016Sedan / Wagon / UteBA, BF, FG, FG X4 Litre MotorRWD

Fitment Notes

  • Suits Ford Falcon BA, BF, and FG 4.0L DOHC petrol engines (non-turbo)
  • Will not fit factory LPG models
  • Protect painted surfaces and wrap headers during trial fitting
  • Clearance may vary with engine mounts, steering, or aftermarket components
  • Will not fit with Factory L.P.G. - refer to PH4490
  • Full Performance Exhaust Systems are available to suit these Headers
  • Confirm the vehicle, engine, transmission and existing modifications before ordering.
  • Verify emissions, noise and vehicle registration compliance in your state or territory before installation.

Specifications

Header Details
Part number SKU: PH4496
Brand Pacemaker
Design Tri-Y Design
Primary pipes 1 5/8" [41mm]
Secondary pipes 1.75" [44mm]
Outlet 3.00" [76mm]
Finish Pacemaker Blue high-temperature finish
Power steering Yes
Air conditioning Yes
Oxygen sensor fittings Incorporated into the headers
Header gasket DSF157 header gaskets, sold separately

What's Included and Recommended With

  • PH4496 Pacemaker headers.
  • Oxygen sensor fittings incorporated into the headers.
  • DSF157 header gaskets are available separately and are recommended for a reliable seal.
  • Pacemaker high-flow catalytic converters are available separately.
  • Ceramic coating is available as an optional upgrade. See PHC50.

Why Good Headers & Exhaust Systems Matter

A 4.0L DOHC draws in about 6,800 L/min of air at 4,000 rpm and 85% volumetric efficiency, and expels an estimated 20,400 L/min of exhaust gas at 600°C.

Good quality headers and a correctly sized exhaust system help reduce exhaust restriction, improve exhaust scavenging, increase torque and engine performance.

Warranty & Compliance

Pacemaker headers are covered against manufacturing defects subject to Pacemaker's current warranty terms and conditions. The warranty applies to the supplied parts and does not cover labour, freight, removal, refitting or consequential costs.

Correct installation, adequate clearance, proper engine tuning and secure exhaust support are essential for warranty coverage. Vehicle modifications and exhaust requirements vary between states. The completed installation must comply with the roadworthy and emissions rules that apply where the vehicle is registered.

Frequently Asked Questions

What vehicles do PH4496 headers suit?

PH4496 suits Ford Falcon BA BF FG inc XR6 4.0L DOHC fitted with the 4 Litre Motor. Confirm your vehicle, engine, transmission and existing modifications before ordering.

Are PH4496 headers Tri-Y?

Yes. Pacemaker specifies PH4496 as a Tri-Y design.

What size are the PH4496 header pipes?

Pacemaker specifies 1 5/8" [41mm] primary pipes, 1.75" [44mm] secondary pipes and 3.00" [76mm] outlets.

Which exhaust gasket is recommended?

The recommended exhaust manifold/header gasket is DSF157, available separately.

Can you arrange for the PH4496 headers to be ceramic coated?

Yes. If you require ceramic coating for these headers see PHC50 for pricing details.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection. Contact Best Mufflers to confirm availability before travelling.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

PH4496


You might also like