Search

Wildcat WILD230 headers (extractors) for Ford Laser KN and KQ models with the 1.8L FP-DE DOHC 16-valve engine 1998 to 2002.
search

Ford Laser KN KQ 1998-2002 1.8 16V DOHC Wildcat Headers/Extractors WILD230

$549.84
Tax included

Wildcat Headers/Extractors WILD230 for Ford Laser KN KQ 1998-2002 1.8 16V DOHC. Australian made with 1 5/8 inch (41mm) primary pipes, 2 inch (51mm) secondary pipes and a 2 1/4 inch (57mm) outlet.

Please check current lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Ford Laser KN KQ 1998-2002 1.8 16V DOHC Headers Extractors - Wildcat WILD230

WILD230 Wildcat headers (extractors) are designed for Ford Laser KN KQ 1998-2002 1.8 16V DOHC. These performance headers replace the factory exhaust manifold and are designed to improve exhaust flow, torque, throttle response and engine performance.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Installation | Warranty | FAQ

Vehicle Fitment

MakeFord
ModelLaser
SeriesKN / KQ
EngineFP-DE DOHC 16-valve petrol
Capacity1.8L / 1839cc
Year Range1998-2002

Fitment Notes

  • Designed as a direct-fit header set for the applicable vehicle
  • Confirm your vehicle, engine and year range match the fitment details above before ordering
  • Inspect the engine mounts before installation, as worn mounts can change header clearance
  • Engine conversions, modified engine mounts or non-standard exhaust systems may affect fitment
  • Please check current lead time before ordering.

Specifications

Part numberSKU: WILD230
BrandWildcat, Australian made by Genie Headers
DesignTri-Y
MaterialMild steel
Primary pipe1 5/8 inch (41mm)
Secondary pipe2 inch (51mm)
Outlet2 1/4 inch (57mm)
FinishHeat-resistant paint rated to approximately 600°C
Header gasketRBG230, please contact us to confirm availability
Fitting timeAbout 2 hours (listed by the manufacturer)

What's Included and Sold Separately

  • Included: 1 x Wildcat WILD230 header assembly
  • Sold separately: header gasket RBG230, and exhaust system pipes, joiners and brackets

Installation Tips

  • Lubricate the bolts with WD-40 or similar before removal
  • Inspect the engine mounts before installation
  • Trial-fit the headers before fully tightening, and protect the painted surfaces
  • Re-torque the flange bolts after the first heat cycle

Why Good Headers & Exhaust Systems Matter

At ~85% volumetric efficiency, a 1.8L engine at 4000rpm draws in approximately 3,100L/min and expels around 9,300L/min exhaust gas due to heat expansion. A well-designed header and exhaust system helps move this gas efficiently, reducing restriction and improving scavenging.

Warranty and Compliance

Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

Exhaust, noise and emissions requirements vary by state, territory and vehicle, so check the rules that apply to your vehicle before fitting.

Frequently Asked Questions

Which vehicles does WILD230 suit?

WILD230 is designed for Ford Laser KN KQ 1998-2002 1.8 16V DOHC. If you are unsure whether it suits your vehicle, please contact us with your details before ordering.

Who makes Wildcat headers, and are they Australian made?

Wildcat headers are Australian made by Genie Headers. WILD230 is made from mild steel with a heat-resistant paint finish rated to approximately 600°C.

Is there a warranty?

Yes. Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

What size are the WILD230 header pipes?

WILD230 uses 1 5/8 inch (41mm) primary pipes, 2 inch (51mm) secondary pipes and a 2 1/4 inch (57mm) outlet.

Is WILD230 in stock, and what is the lead time?

Please check current lead time before ordering. Availability and lead time can change, so contact us on +61 2 9547 3511 or by email and we will confirm before you order.

Are header gaskets included?

The header gasket is not included unless specifically selected or stated otherwise. The listed gasket for this application is RBG230. Please contact us to confirm the correct gasket and current availability.

Can these headers be ceramic coated?

Ceramic coating is not offered for Wildcat headers.

Will I need to modify my existing exhaust system?

Depending on the exhaust system currently fitted, connection or fabrication work may be required between the WILD230 outlets and the existing exhaust system. Contact us if you need advice on suitable exhaust components.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Are they road legal?

Exhaust, noise and emissions requirements vary by state, territory and vehicle. Check the rules that apply to your vehicle before fitting, and make sure the finished installation complies.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

WILD230