Search

Land Rover Series II, Series IIA and Series III 1958–1985 2.0L or 2.25L Wildcat WILD182 headers (extractors)
search

Land Rover Series 2-2A-3 1958-1985 2.0L & 2.25L Wildcat Exhaust Headers/Extractors WILD182

$415.66
Tax included

Wildcat WILD182 Tri-Y headers (extractors) for Land Rover Series 2-2A-3 1958-1985 2.0L & 2.25L. Australian made by Genie Headers, mild steel construction. With 1 1/2 inch (38mm) primary pipes, 1 3/4 inch (44mm) secondary pipes and a 2 inch (51mm) outlet.

Please check current lead time before ordering.

Click the image for larger views and more photos.

Best Mufflers provides expert advice and fast shipping Australia-wide.

Quantity
In Stock

Land Rover Series 2-2A-3 1958-1985 2.0L & 2.25L Headers Extractors - Wildcat WILD182

WILD182 Wildcat headers (extractors) are Australian made by Genie Headers, mild steel headers designed for Land Rover Series 2-2A-3 1958-1985 2.0L & 2.25L. They replace the restrictive factory exhaust manifold and are designed to improve exhaust flow, torque and throttle response.

Please check current lead time before ordering.

Jump to: Fitment | Specifications | Installation | Warranty | FAQ

Vehicle Fitment

MakeLand Rover
SeriesSeries II / Series IIA / Series III
Year Range1958-1985, selected applications
Engine2.0L 4-cylinder petrol, applicable models
Engine2.25L 4-cylinder petrol, applicable models

Fitment Notes

  • Direct-fit replacement for the applicable factory exhaust manifold
  • Check clearance around the engine mounts, steering, chassis and surrounding components during installation
  • Confirm your vehicle, engine and year range match the fitment details above before ordering
  • Inspect the engine mounts before installation, as worn mounts can change header clearance
  • Engine conversions, modified engine mounts or non-standard exhaust systems may affect fitment
  • Please check current lead time before ordering.

Specifications

Part numberSKU: WILD182
BrandWildcat, Australian made by Genie Headers
DesignTri-Y
MaterialMild steel
Primary pipe1 1/2 inch (38mm)
Secondary pipe1 3/4 inch (44mm)
Outlet2 inch (51mm)
FinishHeat-resistant paint rated to approximately 600°C
Header gasketDSF041 (also listed as RBG182S), please contact us to confirm availability
Fitting timeAbout 2.5 hours (listed by the manufacturer)

What's Included and Sold Separately

  • Included: 1 x Wildcat WILD182 header assembly
  • Sold separately: header gasket DSF041 (also listed as RBG182S), and exhaust system pipes, joiners and brackets

Installation Tips

  • Lubricate the bolts with WD-40 or similar before removal
  • Inspect the engine mounts before installation
  • Trial-fit the headers before fully tightening, and protect the painted surfaces
  • Re-torque the flange bolts after the first heat cycle

Why Good Headers & Exhaust Systems Matter

At ~85% volumetric efficiency, a 2.0L engine at 4000rpm draws in approximately 3,400L/min and expels around 10,200L/min exhaust gas due to heat expansion. On the same basis, a 2.25L engine draws in approximately 3,800L/min and expels around 11,400L/min. A well-designed header and exhaust system helps move this gas efficiently, reducing restriction and improving scavenging.

Warranty and Compliance

Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

Exhaust, noise and emissions requirements vary by state, territory and vehicle, so check the rules that apply to your vehicle before fitting.

Frequently Asked Questions

Which vehicles does WILD182 suit?

WILD182 is designed for Land Rover Series 2-2A-3 1958-1985 2.0L & 2.25L. If you are unsure whether it suits your vehicle, please contact us with your details before ordering.

Who makes Wildcat headers, and are they Australian made?

Wildcat headers are Australian made by Genie Headers. WILD182 is made from mild steel with a heat-resistant paint finish rated to approximately 600°C.

Is there a warranty?

Yes. Wildcat headers are covered by a 12 month warranty, subject to the manufacturer's standard warranty terms and conditions.

What size are the WILD182 header pipes?

WILD182 uses 1 1/2 inch (38mm) primary pipes, 1 3/4 inch (44mm) secondary pipes and a 2 inch (51mm) outlet.

Is WILD182 in stock, and what is the lead time?

Please check current lead time before ordering. Availability and lead time can change, so contact us on +61 2 9547 3511 or by email and we will confirm before you order.

Are header gaskets included?

The header gasket is not included unless specifically selected or stated otherwise. The listed gasket for this application is DSF041 (also listed as RBG182S). Please contact us to confirm the correct gasket and current availability.

Can these headers be ceramic coated?

Ceramic coating is not offered for Wildcat headers.

Will I need to modify my existing exhaust system?

Depending on the exhaust system currently fitted, connection or fabrication work may be required between the WILD182 outlets and the existing exhaust system. Contact us if you need advice on suitable exhaust components.

Can I pick up from the store?

Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?

Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?

Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Are they road legal?

Exhaust, noise and emissions requirements vary by state, territory and vehicle. Check the rules that apply to your vehicle before fitting, and make sure the finished installation complies.

Customer Support

For phone orders, advice, or part enquiries - contact us:

📞 Call Now: +61 2 9547 3511 ✉️ Email Us

🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Exhaust Systems Since 1983
Workshop hours: Mon-Fri 8:00am-5:00pm (By Appointment Only) | Phone and email enquiries welcome 24 hours

WILD182


You might also like