Nissan Pulsar N15 SSS 1995-2000 2.0L SR20DE Rear Muffler BM4709 / M5726

BM4709 / M5726 rear muffler assembly is designed as a direct-fit replacement for the original rear muffler on the Nissan Pulsar N15 SSS 5-door hatch from 1995-2000 fitted with the 2.0L SR20DE DOHC petrol engine.

This Australian-made rear muffler assembly is designed to replace the original component without requiring a custom exhaust system, making it suitable for vehicles requiring a quality factory-style replacement.

Recommended gasket: BEG303 – available separately; see product options.

IMPORTANT: This rear muffler is specifically listed for the N15 SSS 5-door hatch with the 2.0L SR20DE engine. Do not assume fitment to 1.6L N15 models or N15 sedans.

Please check availability and current lead time before ordering.

Key Features

• Direct-fit replacement rear muffler assembly
• Suits Nissan Pulsar N15 SSS
• Suits 5-door hatch body
• Suits 2.0L SR20DE DOHC petrol engine
• Suits manual and automatic SSS models
• Designed to connect to the standard exhaust system
• Quality factory-style replacement
• Australian Made

Construction

BM4709 / M5726 is manufactured as a replacement rear muffler assembly for the original N15 SSS exhaust system.

The assembly is designed around the original vehicle layout and mounting locations to provide straightforward replacement fitment while maintaining a factory-style exhaust configuration.

Additional Options

BEG303 exhaust gasket is available separately and can be selected from the product options where available.

Vehicle Fitment

• Make: Nissan
• Model: Pulsar
• Series: N15
• Variant: SSS
• Body: 5-door hatch
• Year Range: 1995-2000
• Engine: 2.0L / 1998cc SR20DE
• Engine Type: DOHC 16-valve four-cylinder petrol
• Fuel System: Electronic fuel injection
• Drive: Front-wheel drive
• Transmission: Manual / Automatic

The Australian N15 Pulsar SSS was the performance-oriented 5-door hatch and used Nissan's naturally aspirated 2.0L SR20DE engine. This distinguishes it from the more common N15 models fitted with the smaller 1.6L engine.

Fitment Notes

BM4709 / M5726 is specifically listed for the Nissan Pulsar N15 SSS 5-door hatch with the 2.0L SR20DE engine.

Do not assume this rear muffler fits N15 sedans or 1.6L N15 hatch models, as the exhaust system configuration may differ.

Because these vehicles are now more than 25 years old, inspect the existing exhaust system before ordering. Previous exhaust repairs, sports exhaust modifications or non-standard pipework may affect direct replacement fitment.

What's Included

• 1 x BM4709 / M5726 rear muffler assembly

BEG303 gasket is available separately – see product options.

Recommended With

BEG303 exhaust gasket is recommended when replacing the rear muffler assembly. It is also advisable to inspect the existing exhaust mounting rubbers, flange hardware and adjoining exhaust pipe before installation and replace worn components where necessary.

Why a Good Replacement Exhaust Matters

A damaged or internally deteriorated rear muffler can cause excessive exhaust noise, rattles, leaks and poor exhaust system operation.

A correctly fitting replacement muffler restores the exhaust system to a secure, properly supported configuration while providing appropriate exhaust gas flow and noise control for normal road use.

Installation Tips

Professional installation is recommended. Before removal, inspect the flange fasteners, exhaust mounting rubbers and adjoining pipework for corrosion or damage.

Lubricate bolts and exhaust mounting rubbers with WD-40 or a similar penetrating lubricant to assist with easier removal and installation.

Fit the exhaust components loosely before final tightening to allow the system to align naturally. Check clearance around the body, suspension and surrounding components before tightening all fasteners.

Warranty & Compliance

This rear muffler is intended as a replacement exhaust component. Installation should comply with applicable Australian state or territory requirements relating to exhaust noise, emissions equipment and vehicle modifications.

FAQ

What Nissan Pulsar does BM4709 / M5726 fit?
BM4709 / M5726 is listed for the Nissan Pulsar N15 SSS 5-door hatch from 1995-2000 fitted with the 2.0L SR20DE petrol engine.

Does this muffler fit the 1.6L N15 Pulsar?
This product is specifically listed for the 2.0L SSS. Do not assume fitment to the 1.6L N15 exhaust system.

Does it suit manual and automatic models?
The Australian N15 SSS was available with both manual and automatic transmissions. BM4709 / M5726 is listed by vehicle and engine application rather than being identified as transmission-specific.

Is this a direct-fit rear muffler?
Yes. The supplied product information specifies BM4709 / M5726 as a direct-fit replacement for the applicable original exhaust system.

Is the exhaust gasket included?
The BEG303 gasket is listed separately in the supplied product information and is available through the product options. It should not be assumed to be included with the rear muffler.

Is this muffler Australian Made?
Yes. BM4709 is Australian Made.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: