Holden Commodore VS 3.8 V6 1995-1997 Automatic Wildcat Headers WILD042A
$765.00
Tax included
Wildcat Headers WILD042A (extractors) suit Holden Commodore VS 3.8L Ecotec V6 automatic models from 1995 to 1997. Australian made with mandrel-bent 38mm (1.50") primary pipes and 51mm (2.00") outlets, these headers are designed to improve exhaust flow, throttle response and usable torque compared with the restrictive factory exhaust manifolds.
Important: WILD042A are designed for VS automatic transmission applications only and will not fit vehicles using manual transmission. Installation requires cutting and joining the headers to the original factory Y-pipe.
Wildcat Headers WILD042A – Holden Commodore VS 3.8L Ecotec V6 Auto 1995–1997
Wildcat WILD042A headers (extractors) are designed for Holden Commodore VS models fitted with the 3.8L Ecotec V6 with automatic transmission from 1995 to 1997.
Manufactured in Australia using mandrel-bent steel pipework, these headers replace the restrictive factory exhaust manifolds and provide improved exhaust gas flow and scavenging. This can help improve usable torque, throttle response and engine breathing while giving the Ecotec V6 a stronger exhaust note.
Key Features
- Australian made Wildcat performance headers
- Designed for the Holden Commodore VS 3.8L Ecotec V6
- Suitable for automatic transmission models only
- Mandrel-bent pipework for improved exhaust flow
- 38mm (1.50") primary pipes
- 51mm (2.00") ID outlets
- Designed to improve exhaust flow and engine breathing
- Improved throttle response and usable torque
- Suitable for street performance and replacement applications
- Australian-wide delivery available
Construction
- Quality mild steel construction
- Mandrel-bent primary pipework
- Heavy-duty cylinder head mounting flanges
- Strong welded construction
- Designed for reliable street use
Pipe Sizes
- Primary Pipes: 38mm (1.50")
- Outlet: 51mm (2.00") ID
Additional Options
- DSF083 exhaust gaskets: Available separately in the product options
Fitment Notes
- Make: Holden
- Model: Commodore VS
- Year: 1995–1997
- Engine: 3.8L Ecotec V6
- Transmission: Automatic only
- Important: Will not fit vehicles using a manual transmission
- Designed for original VS engine and transmission configuration
- Cut and join installation: Headers must be cut and joined to the factory Y-pipe
- Vehicle modifications, engine conversions, transmission conversions or non-standard engine mounts may affect clearance and fitment
- Protect painted header surfaces during trial fitting to prevent scratching
What’s Included
- 1 x Pair Genie WILD042A headers / extractors
Recommended With
- DSF083 exhaust gaskets – available separately
- New exhaust flange hardware where existing components are damaged or corroded
- Professional installation where cutting and joining to the factory Y-pipe is required
Why Good Headers & Exhaust Systems Matter
The Holden 3.8L Ecotec V6 needs to move a substantial volume of air and exhaust gas as engine speed increases.
- At 4,000 rpm, the 3.8L Ecotec V6 moves approximately 6,100 litres of intake air per minute and can expel around 18,300 litres of exhaust gas per minute (@ approximately 600°C).
- At 5,000 rpm, airflow increases to approximately 7,600 litres of intake air per minute and around 22,800 litres of exhaust gas per minute (@ approximately 600°C).
The restrictive factory exhaust manifolds can make it more difficult for the engine to efficiently clear this exhaust gas. Properly designed headers provide smoother individual exhaust runners and improved gas flow, helping the engine breathe more efficiently and improving usable torque and throttle response.
Warranty & Compliance
- Covered by the applicable Wildcat manufacturer's warranty – standard terms and conditions apply
- Warranty applies to qualifying manufacturing defects and does not cover labour, fitting or associated costs
- Correct installation and adequate clearance must be checked during fitting
- Headers should be inspected for correct fitment before permanent exhaust modifications are made
- Verify emissions and registration compliance in your state or territory before installation
FAQ
What vehicles do WILD042A headers fit?
WILD042AA headers are designed for Holden Commodore VS 3.8L Ecotec V6 automatic models from 1995 to 1997.
Will WILD042A fit a manual Commodore VS?
No. WILD042A is specified for automatic transmission applications only.
For manual transmission see "WILD042M" Borg Warner with cable clutch or "WILD042MG" Getrag with hydraulic clutch
Are these headers a direct bolt-on to the complete factory exhaust?
The headers are designed to fit the applicable engine and vehicle, but installation requires cutting and joining to the original factory Y-pipe. Professional installation is recommended.
What size are the WILD042A header pipes?
WILD042A uses approximately 38mm (1.50") primary pipes with 51mm (2.00") ID outlets.
Are exhaust gaskets included?
Gaskets are available separately. DSF083 exhaust gaskets can be selected from the available product options.
Do you ship to the USA?
Yes. Best Mufflers ships exhaust components throughout Australia and internationally, including the USA. International freight, import duties, tariffs and customs charges may apply.
Customer Support
For phone orders, advice, or part enquiries – contact us:
📞 Call Now: +61 2 9547 3511 ✉️ Email Us
🇦🇺 Best Mufflers
87A Planthurst Road, Carlton NSW 2218
Phone: +61 2 9547 3511
Monday–Friday: 8:00am–5:00pm – By Appointment Only
![Wildcat [Genie]](https://bestmufflers.com/bshop/img/m/39.jpg)
WILD042A
You might also like
Wildcat Headers WILD042A (extractors) suit Holden Commodore VS 3.8L Ecotec V6 automatic models from 1995 to 1997. Australian made with mandrel-bent 38mm (1.50") primary pipes and 51mm (2.00") outlets, these headers are designed to improve exhaust flow, throttle response and usable torque compared with the restrictive factory exhaust manifolds.
Important: WILD042A are designed for VS automatic transmission applications only and will not fit vehicles using manual transmission. Installation requires cutting and joining the headers to the original factory Y-pipe.