Toyota Corolla AE90 AE92 AE93 AE95 AE101 AE102 4A-FE 6A-FE 7A-FE Exhaust Manifold Replacement A106MR

Advance A106MR is a shorty exhaust manifold replacement designed for selected Toyota Corolla AE90, AE92, AE93, AE95, AE101 and AE102 models fitted with compatible 4A-FE, 6A-FE and 7A-FE four-cylinder engines.

A106MR is particularly useful as a replacement for a cracked, leaking or damaged original exhaust manifold. Its compact shorty configuration is designed to work with compatible factory-style exhaust layouts rather than functioning as a conventional long-tube performance header.

IMPORTANT: A106MR fits SINGLE ENGINE PIPE models only. Check the engine pipe configuration on your vehicle before ordering.

Gaskets are not included.

Please check availability and current lead time before ordering.

Key Features

• Replacement for cracked or damaged factory exhaust manifolds
• Suits selected Toyota Corolla AE90 / AE92 / AE93 / AE95 / AE101 / AE102 models
• Suits selected 4A-FE, 6A-FE and 7A-FE applications
• Shorty manifold-replacement design
• Fits single engine pipe models only
• Heavy-duty construction
• Press-bent construction
• Australian Made

Construction

Advance A106MR is Australian Made and features heavy-duty, press-bent construction designed as a durable replacement for the original exhaust manifold.

Unlike a conventional long-tube extractor, A106MR uses a compact shorty configuration intended to replace the factory manifold while retaining a compatible single engine pipe exhaust layout.

Additional Options

Gaskets are not included. Please contact Best Mufflers if you require assistance identifying the correct manifold or exhaust gasket for your particular Corolla engine and chassis combination.

Vehicle Fitment

• Make: Toyota
• Model: Corolla
• Chassis: AE90 / AE92 / AE93 / AE95 / AE101 / AE102
• Engine: Selected 4A-FE applications
• Engine: Selected 6A-FE applications
• Engine: Selected 7A-FE applications
• Engine Size: Approximately 1.6L and 1.8L depending on application
• Exhaust Configuration: Single engine pipe models only

Application Note: Current Advance application information specifically lists AE90, AE92, AE93, AE95, AE101 and AE102 for A106MR. Because Toyota used different engines and exhaust configurations across these chassis, the chassis number alone should not be used to determine fitment.

Check that the vehicle has the SINGLE ENGINE PIPE exhaust configuration before ordering.

Fitment Notes

Single Engine Pipe Only: This is the most important fitment requirement for A106MR. It is not intended for Corolla models using an incompatible twin-pipe or alternative engine-pipe arrangement.

A106MR is designed as a shorty manifold replacement. This makes it particularly suitable where the original cast exhaust manifold has cracked or otherwise requires replacement.

Because these Corolla models are now older vehicles, the engine or exhaust system may have been replaced or modified. Check the engine code, chassis code and existing engine-pipe arrangement before ordering.

What's Included

• 1 x Advance A106MR shorty exhaust manifold replacement

Gaskets are not included. Bolts and other installation hardware should not be assumed to be included unless confirmed before ordering.

Recommended With

Inspect the existing manifold gasket, engine pipe gasket, mounting hardware and engine pipe before installation. Contact Best Mufflers if you require assistance identifying replacement exhaust components for your particular Corolla.

Why Replace a Cracked Exhaust Manifold?

A cracked exhaust manifold can allow exhaust gases to escape before reaching the engine pipe and catalytic converter. Common symptoms can include exhaust noise from the engine bay, ticking or tapping noises when cold, exhaust fumes and visible cracking around the original manifold.

Replacing a damaged manifold restores a sealed exhaust path and helps ensure exhaust gases are directed correctly through the vehicle's exhaust and emissions-control system.

Installation Tips

Before ordering, visually confirm that your Corolla uses the required single engine pipe configuration.

Professional installation is recommended. Inspect the manifold mounting surface, studs, engine pipe flange and surrounding components before fitting the replacement manifold.

Lubricate threaded fasteners with WD-40 or a similar penetrating lubricant before removal to assist with easier removal and installation.

As gaskets are not supplied, suitable new gaskets should be sourced before installation.

After installation and several heat cycles, inspect the exhaust system for leaks and recheck accessible fasteners where appropriate.

Warranty & Compliance

A106MR is designed as an exhaust manifold replacement. The vehicle's required catalytic converter, oxygen sensor and other emissions-control equipment must remain correctly installed and operational.

Installation must comply with applicable Australian state or territory requirements relating to emissions, exhaust noise and vehicle modifications.

FAQ

What vehicles does Advance A106MR fit?
Current Advance application information lists selected Toyota Corolla AE90, AE92, AE93, AE95, AE101 and AE102 models.

What engines does A106MR suit?
The supplied application information lists 4A-FE, 6A-FE and 7A-FE applications. Exact fitment depends on the vehicle's engine and exhaust configuration.

Is A106MR designed to replace a cracked exhaust manifold?
Yes. A106MR is a shorty exhaust manifold replacement and is particularly suitable where the original manifold is cracked or damaged.

Does A106MR fit every AE90-AE102 Corolla?
No. A106MR fits single engine pipe models only. Different engines and exhaust configurations were used across these Corolla series, so the existing exhaust arrangement must be checked before ordering.

Is A106MR a long-tube performance header?
No. A106MR is a compact shorty manifold replacement, designed primarily to replace the original exhaust manifold on compatible applications.

Are gaskets included?
No. Gaskets are not included with A106MR.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: