45mm 1¾" Mild Steel Exhaust Pipe Joining Sleeve – EXD175-MS

EXD175-MS exhaust pipe joining sleeve is designed for joining two exhaust pipes with the same 45mm (1¾") outside diameter. Manufactured in Australia from semi-bright mild steel, this straight sleeve has a nominal 45mm internal diameter at both ends and measures 110mm (4.50") long.

Key Features

• Connects two exhaust pipes of the same diameter
• 45mm (1¾") nominal internal diameter at both ends
• 110mm (4.50") overall length
• Semi-Bright mild steel
• Australian made
• Suitable for exhaust fabrication and repairs

Construction

• Material: Semi-Bright mild steel
• Design: Straight exhaust pipe joining sleeve
• Designed to fit over compatible exhaust tubing

Additional Options

• Other exhaust joining sleeve sizes available
• Pipe adaptors and reducers available for joining different pipe diameters
• Bulk quantities available – contact us for pricing

Fitment Notes

• Designed to join two exhaust pipes with a nominal 45mm (1¾") outside diameter
• Both sleeve ends are the same size
• Check actual exhaust pipe outside diameter before ordering
• For joining pipes of different diameters, use a suitable exhaust pipe adaptor or reducer

Specifications

• Part number: EXD175-MS
• Inlet internal diameter: 45mm (1¾") nominal
• Outlet internal diameter: 45mm (1¾") nominal
• Overall length: 110mm (4.50")
• Material: Semi-Bright mild steel
• Manufacture: Australian made

What's Included

• 1 × EXD175-MS mild steel exhaust pipe joining sleeve

Recommended With

• 45mm (1¾") outside diameter exhaust tubing
• Suitable exhaust clamps. See C07 or SBC175

Installation Tips

• Measure the outside diameter of both exhaust pipes before installation
• Ensure pipe ends are clean, straight and free from excessive burrs
• Check sleeve fit and alignment before securing the joint

Warranty & Compliance

• Warranty applies to the supplied part only, subject to applicable Australian Consumer Law rights
• Completed exhaust systems must comply with applicable vehicle noise and emissions requirements

Frequently Asked Questions

What size exhaust pipe does EXD175-MS fit?
It is designed to fit over compatible 45mm (1¾") outside diameter exhaust tubing. Check actual pipe dimensions before ordering.

Can I use this sleeve to join two different pipe sizes?
No. Both ends are the same nominal diameter. For variation of pipe sizes, use a suitable exhaust pipe adaptor or reducer.

Is this sleeve stainless steel or mild steel?
EXD175-MS is manufactured from Semi-Bright mild steel.

How long is the joining sleeve?
The overall length is 110mm (4.50").

Is this product Australian made?
Yes. EXD175-MS is Australian made.

Can I collect my order?
Yes. Pickup must be pre-arranged. Please contact us before ordering to confirm availability and arrange collection.

How much is freight?
Freight varies depending on delivery location and stock availability. Please contact us before ordering if you require a freight quotation.

Customer Support

For phone orders, advice, or part enquiries – contact us: