Ford Falcon EA EB ED Wagon 03/1988-08/1994 3.9L 4.0L Rear Muffler BM4170

BM4170 rear muffler assembly is an Australian-made factory-style replacement exhaust muffler for selected Ford Falcon EA, EB and ED Wagons fitted with 3.9L and 4.0L 6-cylinder engines from March 1988 to August 1994.

BM4170 is designed as a direct-fit replacement for the applicable original rear muffler assembly, making it suitable for replacing a rusted, damaged or leaking factory muffler while retaining the original-style exhaust layout.

This application covers selected EA, EB and ED Falcon Wagon models.

Please check availability and current lead time before ordering.

LARGE ITEM – Please contact us for freight charges before ordering.

Key Features

• Factory-style rear muffler assembly
• Suits selected Ford Falcon EA, EB and ED Wagons
• Designed for selected 3.9L and 4.0L 6-cylinder applications
• 03/1988-08/1994 application range
• Direct-fit replacement
• Designed to connect with the applicable factory-style exhaust system
• Australian Made
• Australia-wide delivery available – contact us for freight charges before ordering
• Fitting service available at Best Mufflers

Construction

• Factory-style replacement rear muffler assembly
• Steel construction
• Designed for the applicable original-style exhaust configuration
• Australian Made

Additional Options

• C11: Exhaust clamp available separately
• FDR004: Exhaust mounting rubbers available separately

Vehicle Fitment

• Make: Ford
• Model: Falcon
• Series: EA / EB / ED
• Body: Wagon
• Engine: 3.9L / 4.0L 6 Cylinder
• Production Range: 03/1988-08/1994
• Drive: Rear Wheel Drive

Model Applications

• Ford Falcon EA Wagon: 03/1988-07/1991 – 3.9L 6 Cylinder
• Ford Falcon EB Wagon: 07/1991-08/1993 – 3.9L / 4.0L 6 Cylinder
• Ford Falcon ED Wagon: 08/1993-08/1994 – 4.0L 6 Cylinder

Fitment Notes

• Wagon models only
• Designed for selected 3.9L and 4.0L 6-cylinder applications
• Direct-fit replacement for the applicable original rear muffler assembly
• Does not suit Falcon sedan or ute exhaust configurations unless separately listed
• Inspect the existing exhaust system before ordering if the vehicle has been modified
• Check the connecting pipe, exhaust clamp and mounting rubbers during installation
• Replace damaged or deteriorated exhaust mounting rubbers where required

What’s Included

• 1 x BM4170 Rear Muffler Assembly

Recommended With

• C11 – Exhaust Clamp
• FDR004 – Exhaust Mounting Rubbers

Installation Tips

Before removing the original muffler, apply penetrating lubricant to the exhaust clamp and other threaded connections. Inspect the connecting exhaust pipe and mounting points for corrosion or damage.

Check the FDR004 exhaust mounting rubbers and replace them if they are stretched, cracked or deteriorated. Worn exhaust rubbers can allow excessive muffler movement and may cause rattles or premature exhaust failure.

After installation, check that the muffler and tailpipe have adequate clearance from the vehicle body, suspension and surrounding components. Start the engine and inspect all exhaust connections for leaks.

Warranty & Compliance

BM4170 is an Australian-made factory-style replacement exhaust component designed for compatible Ford Falcon Wagon applications. Correct vehicle series, engine and existing exhaust configuration should be confirmed before ordering.

FAQ

What vehicles does BM4170 fit?
BM4170 is listed for selected Ford Falcon EA, EB and ED Wagons fitted with 3.9L and 4.0L 6-cylinder engines from 03/1988 to 08/1994.

Does BM4170 fit an EA Falcon Wagon?
Yes. BM4170 suits the applicable EA Falcon Wagon fitted with the 3.9L 6-cylinder engine.

Does BM4170 fit an EB Falcon Wagon?
Yes. BM4170 suits applicable EB Falcon Wagon 3.9L and 4.0L 6-cylinder exhaust configurations.

Does BM4170 fit an ED Falcon Wagon?
Yes. BM4170 suits the applicable ED Falcon Wagon 4.0L 6-cylinder exhaust configuration.

Does BM4170 fit a Falcon sedan?
No. This listing is specifically for Falcon Wagon applications. Sedan exhaust systems use different components and should be checked separately.

Is BM4170 Australian made?
Yes. BM4170 is Australian made.

Is BM4170 a direct-fit replacement?
Yes. BM4170 is designed as a direct-fit replacement for the applicable factory-style rear muffler assembly.

Which mounting parts are recommended?
C11 exhaust clamp and FDR004 exhaust mounting rubbers are available separately.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
This muffler assembly is a large item and freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: