Ford Falcon EF EL AU Wagon 09/1994-09/2002 4.0L Rear Muffler BM4170

BM4170 rear muffler assembly is an Australian-made factory-style replacement exhaust muffler for selected Ford Falcon EF, EL and AU Wagons fitted with the 4.0L 6-cylinder engine from September 1994 to September 2002.

BM4170 is designed as a direct-fit replacement for the applicable original rear muffler assembly, making it suitable for replacing a rusted, damaged or leaking factory muffler while retaining the original-style exhaust layout.

This application covers the EF, EL, AU Series I, AU Series II and AU Series III Falcon Wagon generations through to the end of AU production in September 2002.

Please check availability and current lead time before ordering.

LARGE ITEM – Please contact us for freight charges before ordering.

Key Features

• Factory-style rear muffler assembly
• Suits selected Ford Falcon EF, EL and AU Wagons
• Designed for 4.0L 6-cylinder applications
• 09/1994-09/2002 application range
• Direct-fit replacement
• Designed to connect with the applicable factory-style exhaust system
• Australian Made
• Australia-wide delivery available – contact us for freight charges before ordering
• Fitting service available at Best Mufflers

Construction

• Factory-style replacement rear muffler assembly
• Steel construction
• Designed for the applicable original-style exhaust configuration
• Australian Made

Additional Options

• C11: Exhaust clamp available separately
• FDR004: Exhaust mounting rubbers available separately

Vehicle Fitment

• Make: Ford
• Model: Falcon
• Series: EF / EL / AU
• Body: Wagon
• Engine: 4.0L 6 Cylinder
• Production Range: 09/1994-09/2002
• Drive: Rear Wheel Drive

Model Applications

• Ford Falcon EF Wagon: From 09/1994
• Ford Falcon EF II Wagon: 1995-1996
• Ford Falcon EL Wagon: 1996-1998
• Ford Falcon AU Series I Wagon: 1998-2000
• Ford Falcon AU Series II Wagon: 2000-2002
• Ford Falcon AU Series III Wagon: 2002-09/2002

Fitment Notes

• Wagon models only
• Designed for selected 4.0L 6-cylinder applications
• Direct-fit replacement for the applicable original rear muffler assembly
• Does not automatically suit sedan or ute exhaust configurations
• Inspect the existing exhaust system before ordering if the vehicle has been modified
• Check the connecting pipe, exhaust clamp and mounting rubbers during installation
• Replace damaged or deteriorated exhaust mounting rubbers where required

What’s Included

• 1 x BM4170 Rear Muffler Assembly

Recommended With

• C11 – Exhaust Clamp
• FDR004 – Exhaust Mounting Rubbers
• BM4169 / M3869 – Centre Muffler Assembly

Installation Tips

Before removing the original muffler, apply penetrating lubricant to the exhaust clamp and other threaded connections. Inspect the connecting exhaust pipe and mounting points for corrosion or damage.

Check the FDR004 exhaust mounting rubbers and replace them if they are stretched, cracked or deteriorated. Worn exhaust rubbers can allow excessive muffler movement and may cause rattles or premature exhaust failure.

After installation, check that the muffler and tailpipe have adequate clearance from the vehicle body, suspension and surrounding components. Start the engine and inspect all exhaust connections for leaks.

Warranty & Compliance

BM4170 is an Australian-made factory-style replacement exhaust component designed for compatible Ford Falcon Wagon applications. Correct vehicle series, engine and existing exhaust configuration should be confirmed before ordering.

FAQ

What vehicles does BM4170 fit?
BM4170 is listed for selected Ford Falcon EF, EL and AU Wagons fitted with the 4.0L 6-cylinder engine from 09/1994 to 09/2002.

Does BM4170 fit an EF Falcon Wagon?
Yes. BM4170 suits the applicable EF Falcon Wagon 4.0L 6-cylinder exhaust configuration.

Does BM4170 fit an EL Falcon Wagon?
Yes. BM4170 suits the applicable EL Falcon Wagon 4.0L 6-cylinder exhaust configuration.

Does BM4170 fit an AU Falcon Wagon?
Yes. BM4170 covers selected AU Series I, AU Series II and AU Series III 4.0L Falcon Wagons through to September 2002.

Does BM4170 fit a Falcon sedan?
This listing is specifically for Falcon Wagon applications. Sedan exhaust systems use different components and should be checked separately.

Is BM4170 Australian made?
Yes. BM4170 is Australian made.

Is BM4170 a direct-fit replacement?
Yes. BM4170 is designed as a direct-fit replacement for the applicable factory-style rear muffler assembly.

Which mounting parts are recommended?
C11 exhaust clamp and FDR004 exhaust mounting rubbers are available separately.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
This muffler assembly is a large item and freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: