Toyota 3S-FE 5S-FE Exhaust Manifold Header Gasket HG-233 – Celica Camry RAV4 Corona Carina Caldina

HG-233 exhaust manifold / header gasket is suitable for selected Toyota vehicles fitted with the popular 2.0L 3S-FE and 2.2L 5S-FE four-cylinder petrol engines.

The 3S-FE and 5S-FE were used across a wide range of Toyota passenger cars and SUVs, including selected Celica, Camry, RAV4, Corona, Carina, Caldina, Vista, Avensis, MR2, Picnic/Ipsum and other models.

HG-233 is also the listed exhaust manifold/header gasket for compatible Hurricane HU233STM headers used on Toyota Celica 3S-FE and 5S-FE applications.

Important: Toyota used different exhaust manifolds across some 3S-FE and 5S-FE vehicle applications and markets. Compare the gasket port shape, overall dimensions and bolt-hole positions shown in the product images with your original gasket before ordering.

Key Features

• Exhaust manifold / header gasket
• Suitable for selected Toyota 2.0L 3S-FE applications
• Suitable for selected Toyota 2.2L 5S-FE applications
• Suitable for compatible factory exhaust manifolds
• Suitable for compatible aftermarket headers / extractors
• Listed gasket for compatible Hurricane HU233STM Celica headers

Construction

• Replacement exhaust manifold / header gasket
• Designed to seal between the cylinder head and exhaust manifold or header flange
• Compare gasket dimensions, port shape and bolt-hole positions with your original gasket before installation

Additional Options

• Hurricane HU233STM: Performance headers available separately for compatible Toyota Celica 3S-FE and 5S-FE applications
• Other exhaust manifold, header and exhaust flange gaskets are available from Best Mufflers

Vehicle Fitment

2.0L 3S-FE Applications

• Toyota Celica – ST162, ST182, ST183, ST202, ST203 – selected 3S-FE models
• Toyota Camry – SV21, SV25, SV32, SV33, SV35, SV41, SV42, SV43 – selected 3S-FE models
• Toyota RAV4 – SXA10, SXA11, SXA15, SXA16 – selected 3S-FE models
• Toyota Corona – ST171, ST190, ST191, ST195 – selected 3S-FE models
• Toyota Corona Premio – ST210, ST215 – selected 3S-FE models
• Toyota Carina – T170, T190, T210 series – selected 3S-FE models
• Toyota Carina ED – ST182, ST202, ST203 – selected 3S-FE models
• Toyota Corona Exiv – ST182, ST202, ST203 – selected 3S-FE models
• Toyota Caldina – ST191, ST195, ST210, ST215 – selected 3S-FE models
• Toyota Vista – selected V20, V30, V40 and V50 series 3S-FE models
• Toyota Curren – ST206, ST207 – selected 3S-FE models
• Toyota Ipsum / Picnic – SXM10, SXM15 – selected 3S-FE models
• Toyota Gaia – SXM10, SXM15 – selected 3S-FE models
• Toyota Avensis – selected T220 series 3S-FE models
• Toyota Spacia – selected SR40 3S-FE models
• Toyota Comfort – selected 3S-FE models

2.2L 5S-FE Applications

• Toyota Celica – ST184, ST204 – selected 5S-FE models
• Toyota Camry – SXV10, SXV20 – selected 5S-FE models
• Toyota Camry Scepter – selected 5S-FE models
• Toyota MR2 – SW21 – selected North American 5S-FE models
• Toyota Camry Solara – XV20 – selected 5S-FE models
• Toyota Harrier – SXU10, SXU15 – selected 5S-FE models

Important: The above vehicles identify Toyota models that were produced with the 3S-FE or 5S-FE engine. Exhaust manifold design can vary between vehicle, chassis and market applications. Compare HG-233 with the original gasket before ordering.

Fitment Notes

• Engine: Toyota 3S-FE 2.0L / 5S-FE 2.2L
• Confirm the engine code before ordering
• Compare the gasket port shape and bolt-hole positions with your original gasket
• Do not assume compatibility with 3S-GE, 3S-GTE or other S-series engines
• Remove all traces of the old gasket before installation
• Ensure the cylinder-head and exhaust manifold/header sealing surfaces are clean and flat

What’s Included

• 1 x HG-233 exhaust manifold / header gasket

Recommended With

• Hurricane HU233STM exhaust headers for compatible Toyota Celica applications
• High-temperature exhaust sealant where appropriate
• Replacement manifold/header mounting hardware where required

Installation Tips

Remove all traces of the old gasket and sealing material before installation. Inspect the cylinder-head and exhaust manifold/header sealing surfaces and ensure they are clean, flat and free from damage.

Compare the new HG-233 gasket against the original gasket before installation, paying particular attention to the exhaust port shape, port spacing and mounting-hole positions.

After installation and the initial heat cycles, inspect the gasket area for exhaust leaks and re-check the manifold/header mounting hardware where appropriate.

Warranty & Compliance

HG-233 is intended as a replacement exhaust sealing gasket for compatible applications. Correct gasket selection, surface preparation and installation are essential for reliable sealing and service life.

FAQ

Which engines does HG-233 suit?
HG-233 is suitable for selected Toyota applications fitted with the 2.0L 3S-FE or 2.2L 5S-FE petrol engine.

Which Toyota models used the 3S-FE?
The 3S-FE was used in selected Toyota Celica, Camry, RAV4, Corona, Corona Premio, Carina, Caldina, Vista, Curren, Avensis, Ipsum/Picnic, Gaia, Spacia and other Toyota models.

Which Toyota models used the 5S-FE?
The 5S-FE was used in selected Toyota Celica, Camry, Camry Scepter, MR2, Camry Solara and Harrier models.

Does HG-233 fit Hurricane HU233STM headers?
Yes. HG-233 is listed for compatible Toyota Celica applications using Hurricane HU233STM exhaust headers.

Does HG-233 fit every Toyota 3S-FE and 5S-FE?
Exhaust manifold configurations can vary between Toyota models and markets. Compare the gasket shown in the product images with the original gasket before ordering.

Does HG-233 fit a 3S-GE or 3S-GTE?
This listing is for selected 3S-FE and 5S-FE applications. Do not order it for a 3S-GE or 3S-GTE without confirming the gasket pattern.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Regular post without tracking is included. If you require tracking or a faster delivery option, including Express Post, please select your preferred option during the checkout process.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: