Suzuki Jimny 1998-2002 1.3L G13BB Wildcat Exhaust Headers WILD711

Wildcat WILD711 exhaust headers (extractors) are designed for selected Suzuki Jimny models from 1998–2002 fitted with the 1.3L G13BB petrol engine and compatible coil-suspension configuration.

Featuring an interference-style design with 38mm (1.50") primary pipes, 45mm (1.75") secondary pipes and a 51mm (2.00") outlet, WILD711 is designed for street performance applications to improve exhaust gas flow and scavenging for better torque, throttle response and usable engine performance.

Manufactured in Australia, WILD711 provides a performance header option for the G13BB-powered Jimny while retaining pipe sizing suitable for the small-capacity 1.3L engine.

Please check availability and current lead time before ordering.

Key Features

• Designed for selected Suzuki Jimny 1998–2002 applications
• Suits the 1.3L G13BB petrol engine
• Designed for compatible coil-suspension models
• Interference-style design for street performance applications
• 38mm (1.50") primary pipes
• 45mm (1.75") secondary pipes
• 51mm (2.00") outlet
• Designed to improve exhaust gas flow and scavenging
• Helps improve torque, throttle response and engine performance
• Australian-made Wildcat performance headers

Construction

• Quality steel construction
• Strong welded construction for durability
• Heat-resistant painted finish rated to approximately 600°C
• Australian manufactured by Wildcat

Additional Options

• Headers-back sports exhaust system: Available as a made-to-order option – contact us for current pricing and lead time
• Ceramic coating: Available as an optional upgrade – contact us for current pricing and lead time
• Exhaust manifold/header gasket: Contact us for the correct gasket for your application
• Replacement manifold studs and nuts where existing hardware is worn or corroded

Vehicle Fitment

• Make: Suzuki
• Model: Jimny
• Year Range: 1998–2002
• Engine: G13BB
• Engine Capacity: 1.3L / 1298cc
• Configuration: Inline 4-cylinder petrol
• Suspension: Coil suspension

Fitment Notes

• Designed for selected Suzuki Jimny models from 1998–2002 fitted with the 1.3L G13BB petrol engine
• Designed for compatible coil-suspension models
• Please confirm the vehicle is fitted with the G13BB engine before ordering
• Engine conversions, aftermarket suspension, replacement engine mounts or modified exhaust components may affect clearance and fitment
• Inspect engine and transmission mounts before installation, as worn mounts can alter engine position and header clearance
• Please check availability and current lead time before ordering.

What’s Included

• 1 x Wildcat WILD711 exhaust header / extractor assembly
• Outlet connection components as supplied

Note: Exhaust manifold/header gaskets are not included unless specifically stated or selected separately at the time of purchase.

Recommended With

• Suitable new exhaust manifold/header gasket
• Replacement manifold studs and nuts where required
• Compatible 51mm (2.00") exhaust components where upgrading the downstream exhaust system
• Made-to-order headers-back sports exhaust system
• Optional ceramic coating

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, the 1.298L G13BB engine theoretically draws in approximately 2,596 litres of intake air per minute and can expel around 7,790 litres of hot exhaust gas per minute at approximately 600°C.

A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Installation Tips

• Apply penetrating lubricant such as WD-40 or similar to manifold studs, nuts and exhaust fasteners before removal
• Remove all traces of the old manifold gasket before installing the headers
• Inspect the cylinder-head sealing surface, manifold studs and threads before installation
• Fit a suitable new exhaust manifold/header gasket
• Trial-fit the headers and check all clearances before fully tightening the fasteners
• Check clearance around the steering, suspension, transmission, starter motor and surrounding components
• Protect the painted or coated header surfaces during trial fitting and installation
• Ensure oxygen sensors and emissions-control equipment are correctly retained where applicable
• Check all exhaust connections for leaks after installation
• Inspect and re-tighten the header mounting hardware after the initial heat cycles

Warranty & Compliance

Wildcat headers are covered by the manufacturer's applicable warranty conditions.

Installation must retain the catalytic converter, oxygen sensors and any other emissions-control equipment required for the vehicle. Exhaust and emissions requirements vary between Australian states and territories, and the completed installation must comply with the regulations applicable in your state or territory.

FAQ

Which Suzuki Jimny does WILD711 suit?
WILD711 is designed for selected Suzuki Jimny models from 1998–2002 fitted with the 1.3L G13BB petrol engine.

Does WILD711 suit coil-suspension models?
Yes. WILD711 is designed for compatible coil-suspension Suzuki Jimny models.

What size are the WILD711 header pipes?
WILD711 uses 38mm (1.50") primary pipes, 45mm (1.75") secondary pipes and a 51mm (2.00") outlet.

What type of header design is WILD711?
WILD711 uses an interference-style design developed for street performance applications.

Is a sports exhaust system available?
Yes. A compatible headers-back sports exhaust system is available as a made-to-order option. Please contact us for current pricing and manufacturing lead times.

Can WILD711 be ceramic coated?
Yes. Ceramic coating is available as an optional upgrade. Please contact us for current pricing and lead times.

Are exhaust manifold/header gaskets included?
Exhaust manifold/header gaskets are not included unless specifically stated or selected separately at the time of purchase.

What finish is used on WILD711?
The standard headers have a heat-resistant painted finish rated to approximately 600°C. Ceramic coating is available as an optional upgrade.

Are WILD711 headers Australian made?
Yes. Wildcat WILD711 headers are manufactured in Australia.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, fitment advice or product enquiries, contact Best Mufflers:

Call Now: +61 2 9547 3511 Email Us

Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Monday–Friday 8:00am–5:00pm by appointment
Exhaust Systems Since 1983