Nissan Pulsar N12 1982-1985 1.3L E13 1.5L E15 Wildcat Exhaust Headers WILD107

Wildcat WILD107 headers (extractors) are designed for the Nissan Pulsar N12 from November 1982 to December 1985 fitted with the 1.3L E13 or 1.5L E15 four-cylinder petrol engine.

Featuring a tuned header design, WILD107 provides a performance replacement for the original exhaust manifold and is designed to improve exhaust flow, torque, throttle response and engine performance.

The Wildcat application catalogue specifies 38mm (1.50") primary pipes with a 51mm (2.00") slip outlet.

Australian Made.

Please check availability and current lead time before ordering.

Key Features

• Suits Nissan Pulsar N12
• Application range: 11/1982-12/1985
• Suits 1.3L E13 petrol engine
• Suits 1.5L E15 petrol engine
• Tuned header design
• 38mm (1.50") primary pipes
• 51mm (2.00") slip outlet
• Suits manual transmission
• Suits automatic transmission
• Suits vehicles with air-conditioning
• Suits vehicles with power steering
• Australian Made

Construction

Wildcat WILD107 headers are Australian Made and use a tuned header configuration designed around the Nissan E13 and E15 engine applications.

The current application specifications list 38mm (1.50") primary pipes flowing into a 51mm (2.00") slip outlet.

Additional Options

A replacement header/manifold gasket is available separately – see RBG107.

Please contact Best Mufflers if you require advice on exhaust components or other installation parts for your Nissan Pulsar.

Vehicle Fitment

• Make: Nissan
• Model: Pulsar
• Series: N12
• Year Range: 11/1982-12/1985
• Engine: E13 / E15
• Capacity: 1.3L / 1.5L
• Configuration: Inline four-cylinder petrol
• Drive: Front-wheel drive
• Transmission: Manual or automatic

IMPORTANT: Confirm your Pulsar is an N12 fitted with the E13 or E15 engine before ordering.

Header Specifications

• Design: Tuned
• Primary Pipe: 38mm (1.50")
• Outlet: 51mm (2.00")
• Outlet Type: Slip
• Manual Transmission: Yes
• Automatic Transmission: Yes
• Air-Conditioning: Yes
• Power Steering: Yes
• Replacement Gasket: RBG107

Fitment Notes

E13 & E15: WILD107 is listed for both the 1.3L E13 and 1.5L E15 naturally aspirated petrol engines used in the Nissan Pulsar N12.

Transmission: The Wildcat application catalogue lists WILD107 for both manual and automatic transmission vehicles.

Accessories: The application catalogue also confirms fitment with air-conditioning and power steering.

Outlet Connection: WILD107 uses a 51mm (2.00") slip outlet. Check the condition and dimensions of the existing exhaust connection before installation.

Because these vehicles are now more than 40 years old, engines and exhaust systems may have been replaced or modified. Confirm the engine code and existing exhaust configuration before ordering.

What's Included

• 1 x Wildcat WILD107 header/extractor assembly

Gaskets, bolts and other installation hardware should not be assumed to be included unless confirmed with the current product before ordering.

Recommended With

RBG107 – replacement header/manifold gasket.

Before installation, inspect the existing exhaust system, manifold studs, engine mounts and associated mounting hardware.

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, the 1.3L E13 engine theoretically draws approximately 2,600 litres of intake air per minute at 100% volumetric efficiency and expels around 7,800 litres of hot exhaust gas per minute at approximately 600°C.

At the same engine speed, the 1.5L E15 engine theoretically draws approximately 3,000 litres of intake air per minute and expels around 9,000 litres of hot exhaust gas per minute at approximately 600°C.

A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Installation Tips

Before installation, confirm that the vehicle is a Nissan Pulsar N12 fitted with the 1.3L E13 or 1.5L E15 engine.

Check the existing exhaust connection because WILD107 uses a 51mm (2.00") slip outlet.

Lubricate threaded fasteners with WD-40 or a similar penetrating lubricant before removal to assist with easier removal and installation.

Professional installation is recommended. After installation and several heat cycles, inspect the exhaust system for leaks and recheck accessible fasteners where appropriate.

Warranty & Compliance

Installation must comply with applicable Australian state or territory requirements relating to exhaust noise, emissions and vehicle modifications.

FAQ

What vehicle does Wildcat WILD107 fit?
WILD107 is listed for the Nissan Pulsar N12 from 11/1982 to 12/1985 fitted with the 1.3L E13 or 1.5L E15 petrol engine.

Does WILD107 fit both the 1.3L and 1.5L Pulsar?
Yes. The Wildcat application catalogue specifically lists both the 1.3L E13 and 1.5L E15 engines.

Does WILD107 fit automatic models?
Yes. WILD107 is listed for both manual and automatic transmission Pulsar N12 models.

Does it fit vehicles with air-conditioning or power steering?
Yes. The Wildcat application catalogue lists WILD107 as suitable for vehicles with air-conditioning and power steering.

What size are the WILD107 headers?
WILD107 uses approximately 38mm (1.50") primary pipes with a 51mm (2.00") slip outlet.

What gasket suits WILD107?
The listed replacement header gasket is RBG107.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: