Mazda RX-7 12A Rotary Headers 1978–1985 – Wildcat WILD093

Wildcat WILD093 exhaust headers (extractors) are designed for selected Mazda RX-7 models from 1978–1985 fitted with the 12A rotary petrol engine.

Featuring a tuned-length header design with large 51mm (2.00") primary pipes and twin outlets, WILD093 is designed to replace the restrictive factory exhaust manifold and improve exhaust gas evacuation from the 12A rotary engine.

The large-diameter header design is suited to the substantial exhaust gas flow produced by a rotary engine and is designed to improve exhaust flow, throttle response and engine performance when combined with a suitable performance exhaust system.

Please check availability before ordering.

Key Features

• Designed for selected Mazda RX-7 1978–1985 applications
• Suits the Mazda 12A rotary petrol engine
• Tuned-length header design
• 51mm (2.00") primary pipes
• Twin outlets
• Designed for street performance applications
• Designed to improve exhaust gas flow, throttle response and engine performance

Construction

• Australian-made Wildcat performance headers
• Quality mild steel construction
• Strong welded construction for durability
• Heavy-duty mounting flanges for reliable sealing
• Heat-resistant painted finish rated to approximately 600°C

Additional Options

• GMG093: Exhaust manifold/header gasket available separately
• Replacement exhaust hardware where required
• Performance exhaust system suitable for the 12A rotary engine

Vehicle Fitment

• Make: Mazda
• Model: RX-7
• Year Range: 1978–1985
• Engine: Mazda 12A rotary petrol
• Engine Capacity: 1.2L nominal
• Application: Naturally aspirated

Fitment Notes

• Designed for selected Mazda RX-7 models from 1978–1985 fitted with the 12A rotary engine
• Intended for naturally aspirated 12A applications
• Older RX-7s are commonly modified, so engine, transmission and exhaust configuration should be checked before ordering
• Engine conversions, aftermarket engine mounts, steering components and modified exhaust systems may affect clearance and fitment
• Protect the painted header surfaces during trial fitting and installation
• Replacement exhaust manifold/header gasket – see GMG093
• Please check availability before ordering.

What’s Included

• 1 x Wildcat WILD093 header / extractor assembly
• Outlet connection components as supplied

Recommended With

• GMG093 exhaust manifold/header gasket
• Replacement manifold studs, bolts and nuts where required
• High-temperature exhaust gasket sealant where appropriate
• Performance exhaust system correctly sized for the 12A rotary engine

Why Good Headers & Exhaust Systems Matter

The Mazda 12A rotary engine has very different intake and exhaust characteristics from a conventional four-stroke piston engine, producing strong, closely spaced exhaust pulses and high exhaust gas temperatures. A properly designed tuned-length header and exhaust system helps evacuate these gases efficiently, reducing exhaust restriction and improving exhaust flow, throttle response and engine performance.

Installation Tips

• Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal
• Remove all traces of the old manifold gasket before installation
• Inspect the exhaust-port sealing surfaces, studs and threads before fitting the headers
• Install a new GMG093 gasket
• Trial-fit the header before fully tightening the mounting hardware
• Check clearance around the engine, steering, transmission, chassis and surrounding components
• Protect the painted surfaces during installation
• Inspect and re-tighten the mounting hardware after the initial heat cycles

Warranty & Compliance

Wildcat headers are covered by the applicable manufacturer's warranty subject to standard warranty terms and conditions.

Correct installation and adequate clearance around surrounding components are essential. Vehicle, engine, transmission and exhaust modifications may affect fitment.

FAQ

Which Mazda RX-7 models does WILD093 suit?
WILD093 is designed for selected Mazda RX-7 models from 1978–1985 fitted with the 12A rotary petrol engine.

Does WILD093 suit the Mazda 13B rotary?
No. WILD093 is listed for the 12A rotary engine. For selected RX-4, RX-5 and RX-7 13B applications, see Wildcat WILD092.

Does WILD093 suit turbocharged rotary engines?
WILD093 is intended for naturally aspirated 12A applications and should not be considered a replacement turbo exhaust manifold.

What size are the WILD093 header pipes?
WILD093 uses large 51mm (2.00") primary pipes with twin outlets.

Which gasket does WILD093 use?
The recommended exhaust manifold/header gasket is GMG093, available separately.

What finish is used on WILD093?
The headers have a heat-resistant painted finish rated to approximately 600°C.

Are WILD093 headers Australian made?
Yes. Wildcat WILD093 headers are manufactured in Australia.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, fitment advice or product enquiries, contact Best Mufflers:

Call Now: +61 2 9547 3511 Email Us

Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Monday–Friday 8:00am–5:00pm by appointment
Exhaust Systems Since 1983