Hyundai Tiburon 2002-2008 2.7L V6 Wildcat Exhaust Headers WILD274

Wildcat WILD274 exhaust headers (extractors) are designed for selected Hyundai Tiburon models from 2002–2008 fitted with the 2.7L V6 petrol engine. Suitable for applicable manual and automatic transmission models.

Featuring 45mm (1.75") primary pipes, 51mm (2.00") secondary pipes and 51mm (2.00") outlets, WILD274 is designed to improve exhaust gas flow and scavenging for better torque, throttle response and usable engine performance.

Important: Cut-and-weld exhaust modification is required during installation. Professional fitting is recommended.

Please check availability and current lead time before ordering.

Key Features

• Designed for selected Hyundai Tiburon 2002–2008 applications
• Suits the 2.7L V6 petrol engine
• Suitable for applicable manual and automatic transmission models
• 45mm (1.75") primary pipes
• 51mm (2.00") secondary pipes
• 51mm (2.00") outlets
• Designed to improve exhaust gas flow and scavenging
• Helps improve torque, throttle response and engine performance
• Australian-made Wildcat performance headers

Construction

• High-quality mild steel construction
• Quality welded construction for durability
• Heat-resistant painted finish rated to approximately 600°C
• Australian manufactured by Wildcat

Additional Options

• EG000 gasket: Contact us for availability and details
• Replacement exhaust studs and nuts where existing hardware is worn or corroded
• Performance exhaust system where further exhaust flow improvement is required
• Professional fitting service available – contact Best Mufflers to arrange installation

Vehicle Fitment

• Make: Hyundai
• Model: Tiburon
• Year Range: 2002–2008
• Engine Capacity: 2.7L
• Configuration: V6 petrol
• Transmission: Manual & Automatic

Fitment Notes

• Designed for selected Hyundai Tiburon models from 2002–2008 fitted with the 2.7L V6 petrol engine
• Suitable for applicable manual and automatic transmission models
• Cut-and-weld exhaust modification is required during installation
• Professional installation is recommended
• Recommended gasket: EG000 – contact us for details
• Engine conversions, replacement engines or previously modified exhaust systems may affect fitment
• Check the existing exhaust configuration before ordering
• Please check availability and current lead time before ordering.

What’s Included

• 1 x Set Wildcat WILD274 exhaust headers / extractors

Recommended With

• EG000 gasket – contact us for availability and details
• Replacement exhaust studs and nuts where required
• Suitable exhaust components for the required cut-and-weld connection
• Quality performance exhaust system where further exhaust flow improvement is required

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, a 2.7L V6 engine theoretically draws in approximately 5,400 litres of intake air per minute and can expel around 16,200 litres of hot exhaust gas per minute at approximately 600°C.

A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Installation Tips

• Apply penetrating lubricant such as WD-40 or similar to manifold studs, nuts and exhaust fasteners before removal
• Remove all traces of the old manifold gaskets and inspect the cylinder-head sealing surfaces
• Fit suitable new exhaust manifold/header gaskets
• Trial-fit the headers and check all clearances before completing the exhaust connections
• Cutting and welding is required to connect the headers to the existing exhaust system
• Confirm exhaust alignment before welding
• Check clearance around the engine, transmission, steering and surrounding components
• Protect the painted header surfaces during trial fitting and installation
• Ensure oxygen sensors, catalytic converters and emissions-control equipment are correctly retained where applicable
• Check all exhaust connections for leaks after installation
• Inspect and re-tighten the header mounting hardware after the initial heat cycles

Warranty & Compliance

Wildcat headers are covered by the manufacturer's applicable warranty conditions.

Installation must retain the catalytic converters, oxygen sensors and any other emissions-control equipment required for the vehicle. Exhaust and emissions requirements vary between Australian states and territories, and the completed installation must comply with the regulations applicable in your state or territory.

FAQ

Which Hyundai Tiburon does WILD274 suit?
WILD274 is designed for selected Hyundai Tiburon models from 2002–2008 fitted with the 2.7L V6 petrol engine.

Does WILD274 suit manual and automatic models?
Yes. WILD274 is listed for applicable manual and automatic transmission models.

Are WILD274 headers a direct bolt-on installation?
No. Cut-and-weld exhaust modification is required to connect the headers to the existing exhaust system.

What size are the WILD274 header pipes?
WILD274 uses 45mm (1.75") primary pipes, 51mm (2.00") secondary pipes and 51mm (2.00") outlets.

Which gasket is recommended?
The listed gasket reference is EG000. Please contact us for availability and further details.

What finish is used on WILD274?
The headers have a heat-resistant painted finish rated to approximately 600°C.

Are WILD274 headers Australian made?
Yes. Wildcat WILD274 headers are manufactured in Australia.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: