Hyundai Coupe RD 1996-2002 2.0L G4GF Wildcat Exhaust Headers WILD015

Wildcat WILD015 headers (extractors) are designed for the Hyundai Coupe RD from 07/1996 to 04/2002 fitted with the 2.0L G4GF DOHC 16-valve petrol engine.

WILD015 features a Tri-Y interference design developed for street performance applications, using 41mm primary pipes, 44mm secondary pipes and a 51mm outlet.

Please check availability and current lead time before ordering.

Key Features

• Designed for Hyundai Coupe RD 2.0L models
• 2.0L G4GF DOHC 16-valve engine application
• Tri-Y interference design for street performance applications
• 41mm (1⅝") primary pipes
• 44mm (1¾") secondary pipes
• 51mm (2") outlet
• Suits manual and automatic transmission models
• Suits vehicles with air conditioning and power steering
• Australian Made

Construction

Wildcat WILD015 headers use a Tri-Y configuration with 41mm primary pipes feeding into 44mm secondary pipes and a 51mm outlet.

Wildcat headers are manufactured in Australia by the same Australian manufacturer responsible for Genie headers.

Additional Options

Please contact Best Mufflers for current availability and advice regarding compatible exhaust components for your Hyundai Coupe.

Vehicle Fitment

• Make: Hyundai
• Model: Coupe
• Series: RD
• Year Range: 07/1996-04/2002
• Engine: 2.0L / 1975cc G4GF
• Engine Type: DOHC 16-valve petrol
• Fuel System: MPFI
• Transmission: Manual or automatic
• Drive: Front-wheel drive

Fitment Note: This WILD015 application is for the Hyundai Coupe RD 2.0L. It should not be confused with the earlier Hyundai S-Coupe/Scoupe model.

Header Specifications

• Part Number: WILD015
• Design: Tri-Y interference design
• Primary Pipes: 1⅝" (approximately 41mm)
• Secondary Pipes: 1¾" (approximately 44mm)
• Outlet: 2" (approximately 51mm)
• Manual Transmission: Yes
• Automatic Transmission: Yes
• Air Conditioning: Yes
• Power Steering: Yes
• Manufacture: Australian Made

Fitment Notes

Confirm that the vehicle is a Hyundai Coupe RD fitted with the 2.0L G4GF DOHC 16-valve engine before ordering.

Lubricate threaded fasteners with WD-40 or a similar penetrating lubricant before removal to assist with easier removal and installation.

What's Included

Wildcat WILD015 header assembly. Gaskets and other installation components should not be assumed to be included unless specifically shown or stated with the product.

Recommended With

RBG015 – exhaust manifold/header gasket specified for WILD015.

Why Good Headers & Exhaust Systems Matter

The 2.0L G4GF engine theoretically draws approximately 4,000 litres of intake air per minute at 4,000 rpm at 100% volumetric efficiency. Once combustion has taken place, the hot exhaust gases occupy substantially more volume as they travel through the exhaust system.

Using an illustrative exhaust temperature of approximately 600°C, this represents around 12,000 litres of exhaust gas per minute. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Installation Tips

Professional installation is recommended. Check exhaust alignment, mounting points and surrounding clearances during installation.

Lubricate threaded fasteners with WD-40 or a similar penetrating lubricant before removal. After installation and several heat cycles, inspect the system for exhaust leaks and recheck accessible fasteners where appropriate.

Warranty & Compliance

Installation and use must comply with applicable Australian state or territory regulations, including requirements relating to catalytic converters, emissions equipment, exhaust noise and vehicle modifications.

FAQ

Is this product currently available?
Availability and lead times can vary. Please check availability and current lead time before ordering.

Does WILD015 suit the Hyundai S-Coupe?
This application is for the later Hyundai Coupe RD 2.0L. The earlier Hyundai S-Coupe/Scoupe uses different header applications.

What engine does WILD015 suit in the Hyundai Coupe?
This application is for the 2.0L G4GF DOHC 16-valve petrol engine.

Does WILD015 suit manual and automatic models?
Yes. The Wildcat application catalogue lists WILD015 for both manual and automatic Hyundai Coupe 2.0L models.

What gasket suits WILD015?
The specified exhaust manifold/header gasket is RBG015.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Do you ship to the USA?
Yes. Best Mufflers regularly ships exhaust systems and exhaust parts to customers throughout the United States.

Please note that import duties, tariffs, taxes, and customs clearance fees are not included in the product or shipping price. Once your order is processed and the applicable charges are calculated, we will send you a secure payment link to finalise the import duties and tariff charges before dispatch.

Customer Support

For phone orders, advice, or part enquiries – contact us: