Ford Courier PD PE PG PH 2.6L G6 Headers – Wildcat WILD705

Wildcat WILD705 exhaust headers (extractors) are designed for the Ford Courier PD, PE, PG and PH fitted with the 2.6L G6 SOHC EFI petrol engine from 06/1998 to 02/2006, including applicable 2WD and 4WD models.

WILD705 replaces the restrictive factory exhaust manifold with a larger, smoother-flowing header designed to improve exhaust gas flow and scavenging. Improved exhaust flow can provide better low and mid-range torque, throttle response and overall engine performance, making these headers well suited to street, touring, commercial and 4WD applications.

Key Features

• Designed for Ford Courier PD, PE, PG & PH
• Suits the 2.6L G6 SOHC EFI petrol engine
• 1.50" primary pipes
• 1.75" secondary pipes
• 2.00" outlet
• Direct-fit spring-flange connection
• Suits applicable 2WD and 4WD models
• Designed to improve exhaust flow, torque, throttle response and engine performance

Construction

• Australian-made Wildcat performance headers
• Quality mild steel construction
• Strong welded construction for durability
• Heat-resistant painted finish rated to approximately 600°C
• Precision mounting flanges for reliable sealing

Vehicle Fitment

• Make: Ford
• Model: Courier
• Series: PD, PE, PG & PH
• Engine: G6 SOHC EFI petrol
• Capacity: 2.6L
• Build date: 06/1998–02/2006
• Drive: 2WD & 4WD applications

Fitment Notes

• Direct-fit design for the applicable Ford Courier 2.6L G6
• Uses a spring-flange exhaust connection
• Exhaust manifold/header gasket required – see FDG008
• Please confirm your vehicle is fitted with the 2.6L G6 SOHC EFI petrol engine before ordering

What’s Included

• Wildcat WILD705 header / extractor assembly
• Spring-flange exhaust connection

Recommended With

• FDG008 exhaust header gasket outlet
• Replacement exhaust flange gasket and spring-flange hardware where required
• Replacement manifold studs and nuts where existing hardware is worn or corroded

Why Good Headers & Exhaust Systems Matter

At 4,000 rpm, the 2.6L G6 engine draws in approximately 5,200 litres of intake air per minute and expels around 15,600 litres of hot exhaust gas per minute at approximately 600°C. A well-designed header and exhaust system helps manage this high gas flow efficiently, reducing restriction and improving exhaust scavenging, torque, throttle response and engine performance.

Installation Tips

Apply penetrating lubricant such as WD-40 or similar to the manifold studs, nuts and exhaust fasteners before removal. Trial-fit the header and spring-flange exhaust connection before fully tightening all fasteners. Inspect the existing spring-flange hardware during installation and replace worn components where necessary.

Warranty & Compliance

Wildcat headers are covered by the manufacturer's warranty subject to standard warranty terms and conditions.

Exhaust and emissions requirements vary between Australian states and territories. Installation must retain any emissions-control equipment required for the vehicle and comply with the regulations applicable in your state or territory.

FAQ

What Ford Courier models does WILD705 suit?
WILD705 is designed for the Ford Courier PD, PE, PG and PH fitted with the 2.6L G6 SOHC EFI petrol engine from 06/1998 to 02/2006.

Does WILD705 suit both 2WD and 4WD?
Yes. WILD705 is listed for applicable 2WD and 4WD Ford Courier models fitted with the 2.6L G6 engine.

What type of exhaust connection does WILD705 use?
This application uses a direct-fit spring-flange exhaust connection.

What size are the header pipes?
This WILD705 application is listed with 1.50" primary pipes, 1.75" secondary pipes and a 2.00" outlet.

What manifold/header gasket is required?
The recommended gasket is FDG008, available separately.

Can I pick up from the store?
Yes. Pick up is available but must be pre-arranged before collection.

How much is freight?
Freight varies depending on your delivery location and where stock is available. Please contact us for freight charges before ordering. Where possible, we can arrange dispatch from the nearest available product location to help reduce freight costs and delivery times.

Customer Support

For phone orders, fitment advice or product enquiries, contact Best Mufflers:

Call Now: +61 2 9547 3511 Email Us

Best Mufflers
87A Planthurst Road, Carlton NSW 2218, Australia
Monday–Friday 8:00am–5:00pm by appointment
Exhaust Systems Since 1983